How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Inactive Your Own Question
Inactive, Master Electrician
Category: Electrical
Satisfied Customers: 4772
Experience:  Electrical Contractor
Type Your Electrical Question Here...
Inactive is online now
A new question is answered every 9 seconds

Put in new 220 Dryer line and outlet 30amp Breaker all was

Resolved Question:

Put in new 220 Dryer line and outlet 30amp Breaker all was working well.My son came over and stapled wire did not work after that.When you throw breaker it pops and sparks.Wire only to breaker still pops breaker only to box stays on.Could he had pinched the line causing this. thank you
Submitted: 7 years ago.
Category: Electrical
Expert:  Inactive replied 7 years ago.
Chat Conversation Started
The Electrical Doctor :

Yes that is exactly what is probably happening. You will need to remove the staples that were installed and then retest the circuit. Then if that fixes the problem, you will want to re-install the staple but gently - not so hard it shorts the wires.

Inactive and 2 other Electrical Specialists are ready to help you