How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Other
Category: Electric Vehicles
Satisfied Customers: 28370
Experience:  Worked on fleet of various electric vehicles, golf carts, scissor lifts and electric booms.
Type Your Electric Vehicles Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Working with 3 position ignition switch with lights on in

Customer Question

working with 3 position ignition switch with lights on in position #2 in a 1994 E Z GO golf Cart. wires connected at present are wrong . Position #1 lights on no motion for cart. Position #2 lights still on, and cart moves. What do I do to correct wiring ??
JA: Just to clarify, what are the exact lights you're talking about?
Customer: Head lights with corner lights no turn indicator
JA: What is the model of your '94 electric?
Customer: IT's a 36 volt 1994 EZ go Monitor I think
JA: Are you fixing your Volt yourself? What have you tried so far?
Customer: The cart was hooked up wrong to 36 volts instead of 12 volts Blew up all lamps before fuse let go
JA: Anything else you want the mechanic to know before I connect you?
Customer: I've used an Ohm meter but have not been able to measure Voltage
Submitted: 4 months ago.
Category: Electric Vehicles
Expert:  Curtis B. replied 4 months ago.

Thanks for giving me the opportunity to work with you! I will do my best to help.

Expert:  Curtis B. replied 4 months ago.

lights are an add on to the cart. You can't control 12 volt lights through the ignition switch , which requires 36 volts. The lights would have their own switch, coming off the two batteries to get 12 volts. Or you have to use a voltage invertor to drop the 36 volts to 12 volts.

Expert:  Curtis B. replied 4 months ago.

see question is still open, did you see my response?