How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Other
Category: Electric Vehicles
Satisfied Customers: 28101
Experience:  Worked on fleet of various electric vehicles, golf carts, scissor lifts and electric booms.
Type Your Electric Vehicles Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have just replaced the solenoid and 1 battery on my early

Customer Question

I have just replaced the solenoid and 1 battery on my early 90 Model TXT Ezgo cart. When I meter each battery everything is fine. However, if I check for 36volts I only read 24 v. ????
JA: Have you checked all the fuses? Do you have a wiring diagram?
Customer: No sir no wiring diagram, yes I have check 1 fuse is there more?
JA: What is the make/model of your car?
Customer: Let me grab my cell Ill be right back
JA: Are you fixing your vehicle yourself? What have you tried so far?
Customer: JO889 is the Model
JA: Anything else you want the mechanic to know before I connect you?
Customer: no ma'am
Submitted: 8 months ago.
Category: Electric Vehicles
Customer: replied 8 months ago.
Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Expert:  Curtis B. replied 8 months ago.

Thanks for giving me the opportunity to work with you! I will do my best to help.

Expert:  Curtis B. replied 8 months ago.

Cart has to have 36 vols to run. Check across the battery pack, do you ave 36 volts? If not, check each connection and battery , stating with either end, and leave one meter lad on first battery, then read the next battery, it should increase 6 volts each time you move the test lead. 6 volts, 12 volts, 18 volts, up to h 36 volts. If it does not increase, battery or connection to the one you just tested.

Expert:  Curtis B. replied 8 months ago.

I see question is still open. Here is a diagram.