How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Other
Category: Electric Vehicles
Satisfied Customers: 28066
Experience:  Worked on fleet of various electric vehicles, golf carts, scissor lifts and electric booms.
Type Your Electric Vehicles Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have an 36V EZ-GO TXTPDS (not sure what year) and I had to

Customer Question

I have an 36V EZ-GO TXTPDS (not sure what year) and I had to replace a battery. All done with that and it is showing full charge, but the cart won't move. Is there a fuse or something else that I need to check? Thanks.
JA: Have you located the fuse box? Have you checked the circuit?
Customer: I have not located the fuse box. The circuit is okay.
JA: What year is your V EZ-GO?
Customer: I don't know, Date Code is F2205, S/N(###) ###-####
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: I would like to fix myself. I have replaced one 6V battery and the rest of the batteries all show good voltage.
JA: Anything else you think the mechanic should know?
Customer: The beeper for reverse is working, there is just no propulsion.
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Electric Vehicle Mechanic about your situation and then connect you two.
Submitted: 1 year ago.
Category: Electric Vehicles
Expert:  Curtis B. replied 1 year ago.

See the attached picture, the key switch gets voltage from the carts charger connection. If the reed switch in the connection does not make after the charger is removed, you get no voltage to the keyswitch, no voltage at the key, no voltage to the footswitch. Ezgo does not use a fuse. Your cart is 2005 by the F2205 number.

Expert:  Curtis B. replied 1 year ago.

Did you see my response and the link?