How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Eric Your Own Question
Eric, Automotive Repair Shop Manager
Category: Electric Vehicles
Satisfied Customers: 32378
Experience:  Automotive Repair Shop Manager, Technician/JA Mentor
Type Your Electric Vehicles Question Here...
Eric is online now
A new question is answered every 9 seconds

I have a 2014 Gem car, the wrench light comes on when I

Customer Question

I have a 2014 Gem car, the wrench light comes on when I release the hand break. I have replaced the controller at the advice of another tech (same thing), I have checked all the fuses. code 64 displays.
Submitted: 2 years ago.
Category: Electric Vehicles
Expert:  Eric replied 1 year ago.


I am sorry that you have not been helped yet. I just came online and saw your question

64 line driver input voltage low inspect controller

Did you have the controller programmed and was it a new one, used one, or remanufactured unit

Customer: replied 1 year ago.
I have 3 Gem cars I took one out of the working one to see if it would solve the problem it did not. The one I took out of the one in question works on the other and we are driving it (I swapped them).
Expert:  Eric replied 1 year ago.


Ok, then this will be in the wiring harness. Let me see if I have the schematics for this

Customer: replied 1 year ago.
okay please check for me so we can close the ticket.
Customer: replied 1 year ago.
hey Eric where are we on this?