Dodge

Dodge Repair Questions? Ask a Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Dodge Questions
I have a cylinder 3 misfire. Recently had all 16 spark plugs
I have a cylinder 3 misfire. Recently had all 16 spark plugs and all 8 ignition coils replaced, and then replaced the fuel injector for cylinder 3, and still having the misfire, which has not become w… read more
CaseyA925
CaseyA925
head diagnostic specialist
certified for A4, A5, A6 and A7
1,610 satisfied customers
2010 ram 1500 5.7l PO300 code. 183,000. Just did cam lifters
just did cam lifters phazer timing chain had heads rebuilt new plugs coils cam sensor short runner actuator… read more
Mike S.
Mike S.
Vocational, Technical or Trade Scho
9,163 satisfied customers
When I give it gas to speed up to pass and have to gas hard
When I give it gas to speed up to pass and have to gas hard and get to around 5000 rpms my engine light blinks and dings at me then truck shakes for like 2-3 min the back right … read more
Bart
Bart
Master Automotive Technician
High School Diploma
3,309 satisfied customers
I can not find the recommended lifters for my MDS delete on
Second opinion] I can not find the recommended lifters for my MDS delete on my 2011 Dodge Ram 1500 SLT 5.7L V8 HEMI 2 door... I had a misfire on 4 cylinders and oil leak and low oil pressure so its br… read more
JoseV819
JoseV819
Service Technicain
Automotive Technology Degree
512 satisfied customers
Cylinder 6 misfire Dodge 2014 RAM 5.7 Hemi Big Horn. Any
Cylinder 6 misfire Dodge 2014 RAM 5.7 Hemi Big Horn. Any chance recall on it ? Replaced plugs, lifters, wires. Engine light. Would this part help ? TPS throttle position sensor … read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
23,717 satisfied customers
2012 ram 1500 5.7l Does the 2wd have transfer case control
2012 ram 1500 5.7l Does the 2wd have transfer case control module Already installed? I am converting a 2wd to 4wd and have everything mechanically as well as wiring harness but can't seem to locate th… read more
Daniel Chaidez
Daniel Chaidez
Technician
Diploma
4,804 satisfied customers
Timing 5.7 hemi. I replaced the cam, set the timing. Upon
Timing 5.7 hemi. I replaced the cam, set the timing. Upon restart it stumbled and dies. Hard to restart but still dies. Computer has no codes. Figured the camshaft is off a tooth. Pulled it down, the … read more
sprinkles08
sprinkles08
Technician
High School or GED
19,946 satisfied customers
I'm rebuilding a 5.7 hemi motor without mds. Do I need a non
I'm rebuilding a 5.7 hemi motor without mds. Do I need a non mds camshaft or can I use the old can with non mds lifters? … read more
Andrew
Andrew
Master Diagnostic Technician
Associate of Occupational in Automotive Technology
572 satisfied customers
I have a 2012 ram 1500.. first thing first I had misfire on
I have a 2012 ram 1500.. first thing first I had misfire on cilynder #3 turns out it was a cam and lifter problem, I had them replaced and once then new error code p0306. Alltthe things I do … read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
23,717 satisfied customers
Is it possible to swap a dodge ram 1500 2007 5.7l Hemi
Is it possible to swap a dodge ram 1500 2007 5.7l Hemi engine into a 2005 Dodge ram 1500 5.7l truck? … read more
kalamykid
kalamykid
Pactor automotive
Vocational, Technical or Trade Scho
6,156 satisfied customers
Here's my problem. I have a 2012 Dodge ram lonestar 1500 V8
OK here's my problem. I have a 2012 Dodge ram lonestar 1500 V8 5.7 L hemi with 157,000 miles, and I'm getting a cylinder 2 misfire. - Replaced spark plugs with dealer recommended plugs - Did a fuel in… read more
-Brad-
-Brad-
Foreman Dodge Dealership
Vocational, Technical or Trade Scho
8,279 satisfied customers
Timing issue after replacing cam and heads, 25,000 miles, do
25,000 miles, do not know timing number, after market upgrades causing timing issue. possible causes and fixes? … read more
-Brad-
-Brad-
Foreman Dodge Dealership
Vocational, Technical or Trade Scho
8,279 satisfied customers
Misfiring valvesprings are good lifter rods are good #1
misfiring valvesprings are good lifter rods are good #1 cylinder plugs are black and wet the rest are a white is clor and dry plugs and plug wires were just changed about 50 mines ago any thoughts … read more
Jerry
Jerry
Master Mechanic
Vocational, Technical or Trade Scho
1,754 satisfied customers
5.7L Hemi, Dodge 2016, Big Horn Ram truck 4x4: check engine
5.7L Hemi, Dodge 2016, Big Horn Ram truck 4x4: check engine light on and flashing while driving - could this be the result of using ethanol (87 octane) in gasoline? Thanks!… read more
-Brad-
-Brad-
Foreman Dodge Dealership
Vocational, Technical or Trade Scho
8,279 satisfied customers
Dodge Ram 1500 4WD 5.7 liter w/MDS: I have a 2006 Dodge Ram
I have a 2006 Dodge Ram 1500 with a 5.7 liter hemi. I just replaced the lifters and push rods and put everything back together with new spark plugs. I just started it up and it keeps giving me P0300 e… read more
william readon
william readon
NONE
1,898 satisfied customers
2006 Dodge Ram 1500: the exhaust system..5.7L..Hemi..Horn
is the exhaust system in a 2006 Dodge Ram 1500 5.7L Hemi Big Horn Edition stainless steel stock>??… read more
DODGEEXPERT
DODGEEXPERT
SERVICE MANAGER
Associate Degree
546 satisfied customers
2006 dodge RAM 1500: hemi..also have the knocking issue..parts store
Have a 2006 dodge RAM 1500 HEMI. also have the knocking issue at idle. a guy at a parts store told me to use thicker oil. i run 91 in it as well. knocks when i first start it up and then goes away and… read more
jeepmopar76
jeepmopar76
Master tech
Vocational, Technical or Trade Sc
1,228 satisfied customers
ram 1500: recirculation..Circuit High..a sensor problem..egr
This is the generic code I am reading Exhaust Gas Recirculation Sensor A Circuit High Is this a sensor problem or do I need to change the EGR ram 1500 2004… read more
Chris
Chris
Shop Foreman
8,640 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

< Previous | Next >

Meet the Experts:

Jerry

Jerry

Master Mechanic

1,754 satisfied customers

ASE Master tech, 30 years exp. troubleshooter, driveability tech

Chris

Chris

Shop Foreman

8,640 satisfied customers

Dodge/Cummins and Chrysler Certified Master Tech

Mopar Certified

Mopar Certified

Dodge Technician

7,131 satisfied customers

24 Year Chrysler/Dodge Certified Specialist

moparfl

moparfl

ASE Certified Technician

3,292 satisfied customers

ASE Master Tech Gold level Chrysler Status 30 years dealership exp

Dodgerench

Dodgerench

ASE Certified Technician

2,850 satisfied customers

30+ years Dodge/Chrysler exp., ASE Master with L1 certification. Driveability/ combustion specialist

Tim Mohr

Tim Mohr

ASE MASTER TECH

2,479 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Chris (aka-Moose)

Chris (aka-Moose)

Technician

2,459 satisfied customers

24 years of experience diagnosing & repairing

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x