Dodge

Dodge Repair Questions? Ask a Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Dodge Questions
Replaced the water pump, timing chain and guides, head
Replaced the water pump, timing chain and guides, head gaskets. Now engine will run rough at idle, and fine if given some gas on pedal, no hesitation. But still leaking water into oil and can't seem t… read more
Robert R
Robert R
Auto Technician
Vocational, Technical or Trade Scho
5,708 satisfied customers
Changed timing chain but when i removed the old one both
Changed timing chain but when i removed the old one both timing marks at 12 o'clock. Rotated the motor by the crank bolt for TDC and every time rotor was 180 degrees off. Still havent put it back toge… read more
Robert R
Robert R
Auto Technician
Vocational, Technical or Trade Scho
5,708 satisfied customers
I have a 2004 dodge intrepid 2.7 and I was getting
I have a 2004 dodge intrepid 2.7 and I was getting everything ready to change the water pump and the chain tentioner popped out then the chain skipped a couple links on the crank. #1 cylinder is all t… read more
Robert R
Robert R
Auto Technician
Vocational, Technical or Trade Scho
5,708 satisfied customers
2006 Dodge Magnum 2.7 put new chains and head gaskets on it
2006 Dodge Magnum 2.7 put new chains and head gaskets on it ran ok but right bank ....passenger side ....was rattling almost as if it was not getting oil remove valve cover reposition cam caps on inta… read more
Jon
Jon
129 satisfied customers
sebring sedan: I took timing chain loose off my 2.7 v6 non
I took timing chain loose off my 2.7 v6 non flex fuel to install new water pump. Work loose without removing cam sprockets and installed pump. Rethreaded chain. Didn't notice colored links spun around… read more
-Brad-
-Brad-
Foreman Dodge Dealership
Vocational, Technical or Trade Scho
8,279 satisfied customers
Dodge Grand caravan SXT: I replaced the timing chain on my
I replaced the timing chain on my 2004 Dodge grand caravan SXT using an aftermarket chain set (Cloyes). I did not match the cam sensor windows up to the original gear. Kept getting a P0344 code. Repla… read more
-Brad-
-Brad-
Foreman Dodge Dealership
Vocational, Technical or Trade Scho
8,279 satisfied customers
Dodge Dakota: I have an 02 Dodge Dakota 3.9 magnum that I am
I have an 02 Dodge Dakota 3.9 magnum that I am building. I am about to put the heads back on but I want to get the timing chain assembly back on. Just want to verify the correct procedure to this. Ple… read more
Robert R
Robert R
Auto Technician
Vocational, Technical or Trade Scho
5,708 satisfied customers
2004 dodge: alignment..the cam sprockets..passenger side..driver side
installing timing chains on 2004 dodge intripet 2.7 L not sure of the alignment marks on the cam sprockets for the passenger side dual cams. I did find the arrow marks on the driver side only marks fo… read more
BigBob
BigBob
Service Manager
High School or GED
4,792 satisfied customers
Spark plugs..coils..crankshaft..Tested the camshaft position sensor
Not getting spark to any of the spark plugs checked the coils they checked ok. Replaced the crankshaft postion sensor. Tested the camshaft position sensor still no spark any ideas… read more
sprinkles08
sprinkles08
Technician
High School or GED
19,946 satisfied customers
I removed every thing i set the sprocket..harmonic balancer..oil pump
Timing help. guys i need help setting the timing on my car just replaced water pump. When I removed every thing i set the sprocket where the harmonic balancer is to the mark on the oil pump before i r… read more
Ricardo Hohl
Ricardo Hohl
Auto Motive Instructor
Automotive tech
4,563 satisfied customers
larger than stock cam in a 5.7 hemi throw off the timimg marks..chain
will putting a larger than stock cam in a 5.7 hemi throw off the timimg marks on the sproket and chain?… read more
ASEMaster35yrs
ASEMaster35yrs
Vocational, Technical or Trade Scho
2,061 satisfied customers
I have an 09 dodge challenger rt 5.7 hemi. im istalling a new
I have an 09 dodge challenger rt 5.7 hemi. im istalling a new camshaft. my cam sproket doesnt have an arrow or timing marks. my chain has two rectangles on one side and one on the other side. whats th… read more
moparfl
moparfl
ASE Certified Technician
Vocational, Technical or Trade Scho
3,292 satisfied customers
2001 Dodge Intrepid: V6..Cranks..over 100 psi) - fuel pressure in rail
2001 Dodge Intrepid V6 2.7 engine. Cranks but doesn't start. Diagnostics include - good compression (over 100 psi) - fuel pressure in rail but I am not sure if they are firing (I don't smell any fuel)… read more
quickcar
quickcar
High School or GED
1,688 satisfied customers
2004 dodge intrepid: liter..water pump..valve cover..drivers side
hi! i have a 2004 dodge intrepid with 2.7 liter motor just changed water pump and was atempting to aline timing marks on camshafts. book says to aline marks on cam shafts at 12 o'clock postion to the … read more
mtech02
mtech02
some college
136 satisfied customers
2002 Dodge Ram 1500 4x4: magnum..rebuild porsche engines but I
I am rebuilding my 2002 Dodge Ram 1500 4x4 4.7 magnum engine and am in the process of taking it apart. I do have some help from some people that rebuild Porche engines but I need some expert advice fr… read more
HWeaver184
HWeaver184
Vocational, Technical or Trade Scho
130 satisfied customers
1988 dodge ram 50: the way the timing gear marks..timing chain
Hi I have a 1988 dodge ram 50 with a 2.6 motor. I need to know the way the timing gear marks are pointing to put the timing chain back on? Each timing gear has a dot on them thats suppose to be pointi… read more
ttiger79
ttiger79
Auto Mechanic
High School or GED
880 satisfied customers
grand cherokee SRT8: doing a cam swap..timing..chain..crank
I am doing a cam swap on an 07 grand cherokee SRT8 6.1L. I need to know how to reinstall the cam. What is the correct procedure for setting the timing with the chain, crank and cam sprocket marks?… read more
vipertech763
vipertech763
Vocational, Technical or Trade Scho
1,854 satisfied customers
replaceing the water pump and when i had the timing belt..crank..rotor
i was replaceing the water pump and when i had the timing belt off the cam gear was turn ..so now i am haveing a problem getting the front cam to hit the timing mark with the crank and other cam and t… read more
marc
marc
fleet supervisor
Vocational, Technical or Trade Scho
1,140 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

< Previous | Next >

Meet the Experts:

Jerry

Jerry

Master Mechanic

1,754 satisfied customers

ASE Master tech, 30 years exp. troubleshooter, driveability tech

Chris

Chris

Shop Foreman

8,691 satisfied customers

Dodge/Cummins and Chrysler Certified Master Tech

Mopar Certified

Mopar Certified

Dodge Technician

7,419 satisfied customers

24 Year Chrysler/Dodge Certified Specialist

moparfl

moparfl

ASE Certified Technician

3,292 satisfied customers

ASE Master Tech Gold level Chrysler Status 30 years dealership exp

Dodgerench

Dodgerench

ASE Certified Technician

2,850 satisfied customers

30+ years Dodge/Chrysler exp., ASE Master with L1 certification. Driveability/ combustion specialist

Chris (aka-Moose)

Chris (aka-Moose)

Technician

2,539 satisfied customers

24 years of experience diagnosing & repairing

Tim Mohr

Tim Mohr

ASE MASTER TECH

2,479 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x