Dodge

Dodge Repair Questions? Ask a Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Dodge Questions
I need the torque specification and tightening sequence for
Good Morning, I need the torque specification and tightening sequence for the intake manifold and inner plenum for a 1998 Dodge Ram 2500 5.9L gasoline motor… read more
RiopH
RiopH
Diagnostic Technician and programmer
191 satisfied customers
Thank you. 1998 Dodge Ram 2500 Turbo Diesel. I bought the
I bought the car a couple weeks ago. It checked out with a perfect score on it's VIN check. It only has 202k miles and the transmission was rebuilt about 8k miles ago. (I'm told) It starts up just find and the engine runs great. But when I put it in "Drive" or "Reverse" (ESPECIALLY when cold) it starts to shudder and sometimes stalls … read more
sprinkles08
sprinkles08
Technician
High School or GED
19,879 satisfied customers
What year of dodge ram trucks transmissions will work with
What year of dodge ram trucks transmissions will work with my 2001 dodge ram 2500 5.9l 2wd gas truck … read more
Dan
Dan
Automotive Technician
Vocational, Technical or Trade Scho
24,997 satisfied customers
2003 Dodge Ram 2500 5.9L 6 speed. I have replaced the output
2003 Dodge Ram 2500 5.9L 6 speed. I have replaced the output seal on the transfer case to the drive shaft a half dozen times now and that rubber cone that attaches to the seal continually allows a sma… read more
-Brad-
-Brad-
Foreman Dodge Dealership
Vocational, Technical or Trade Scho
8,274 satisfied customers
I have a 1998 Dodge truck 2500 with the 5.9L 24 valve
I have a 1998 Dodge truck 2500 with the 5.9L 24 valve Cummins how many hour job is it to replace the head gasket. It is leaking in the front right corner. And is there any specialty tools I need besid… read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
22,966 satisfied customers
Dodge RAM 2500 4x2: it wont start..km..morning it just cranks over
Dodge RAM 2500 4x2: I have a 1998 dodge 2500 diesel it won't I have a 1998 dodge 2500 diesel it won't start and has three codes 216,336 and 1693 is it serious and can I fix it myelf pretty good with g… read more
Dodge expert
Dodge expert
ASE MASTER TECH, REPAIR FACILITY OWNER
High School or GED
3,636 satisfied customers
2000 dodge: 4x4 2500 truck auto..ram diesel..sluggish..its pulling
i have a 2000 dodge ram 4x4 2500 truck auto trans, we put a 1999 auto trans from a 4x4 dodge ram diesel, the truck seems to be sluggish when starting out and then ok like its pulling some wait or some… read more
Expert
Expert
4,444 satisfied customers
1994 Ford: factory rebuilt cummins and automatic..replace my
Hello- I think I can buy a 1994 Ford COE street sweeper truck with a "factory" rebuilt Cummins and automatic for about $2000. Will this engine replace my 1992 Dodge 350 automatic if it is ever needed?… read more
Rudolph Diesel
Rudolph Diesel
Service manager/ Master mechanic
Vocational, Technical or Trade Scho
1,918 satisfied customers
2004 Ram 1500: it has a 5.7 hemi..ticking noise..seafoam..lifter
I have a 2004 Ram 1500, it has a 5.7 hemi. The engine has a ticking noise, the ticking quit for about a week after I added some seafoam to the oil but it now stop. lifter? push rod? how hard and costl… read more
Chris
Chris
Shop Foreman
8,424 satisfied customers
1998 Dodge Ram 2500: XLT..diesel..reservoir is on full..dip stick
I have a 1998 Dodge Ram 2500 XLT 5.9L diesel. The power steering only works on left turns - and that is not great - the reservoir is on full on the power steering dip stick and it groans whenever I go… read more
jeepmopar76
jeepmopar76
Master tech
Vocational, Technical or Trade Sc
1,228 satisfied customers
I35: stranded- 99 ram quad cab 1500 4x4 5.9 at...cruising..rev..rpm
stranded- 99 ram quad cab 1500 4x4 5.9 at. Was cruising down I35 for ~2 hrs when truck decided to not want to pull itself up the hills, and eventually a top speed ~ 40mph max. will not even rev over ~… read more
Dodge expert
Dodge expert
ASE MASTER TECH, REPAIR FACILITY OWNER
High School or GED
3,636 satisfied customers
2004 Dodge: I want to change the engine from gas to diesel..powertrain
I have a 2004 Dodge 1500, I want to change the engine from gas to diesel. Has it been done very often? Will I need a new powertrain? Will a 5.9L fit or will it need a 12Valve....or are those the same … read more
b5demon
b5demon
Automotive Technician
Vocational, Technical or Trade Scho
3,762 satisfied customers
1996 Dodge ram 1500: with a 5.9l 360 gasoline engine
i need to know the vavle clearance for a 1996 Dodge ram 1500 with a 5.9l 360 gasoline engine.… read more
sprinkles08
sprinkles08
Technician
High School or GED
19,879 satisfied customers
dtc code p1693 98 ram diesel torq converter locking and unlocking
dtc code p1693 98 ram diesel torq converter locking and unlocking erracticly. changed alternator and it stopped for awhile and now its doing it again. some say its the tps some say to remove the groun… read more
moparfl
moparfl
ASE Certified Technician
Vocational, Technical or Trade Scho
3,292 satisfied customers
1998 dodge: blowing..exhaust & sitting..engine compartment..runs rough
The truck is a 1998 dodge 2500 4x4 5.9L 40k original miles, I'll make a list of the problems.(1) going through lots of oil that you can see blowing out the exhaust & sitting in the bottom of the carb.… read more
moparfl
moparfl
ASE Certified Technician
Vocational, Technical or Trade Scho
3,292 satisfied customers
1998 Dodge: 4WD..engage..cruise control doesnt work..000 miles
my son has a 1998 Dodge 2500 with cummins diesel-4WD won''t engage, cruise control doesn''t work, and he thinks there is no vacuum to either one-168,000 miles-is the vacuum pump shot? How hard is it t… read more
ProAnswerMan
ProAnswerMan
ASE Master Technician
Associate Degree
408 satisfied customers
Dodge Dakota: 4x4..5.2 v8 that runs great sitting in park..dies
I have a ''94 Dodge Dakota 4x4 5.2 v8 that runs great sitting in park. It takes off normally with plenty of power but as it gets ready to shift into 3rd it just dies. Like someone just shuts the ignit… read more
mndave0002
mndave0002
Associate Degree
250 satisfied customers
1998 RAM 2500: V-10 gas..hydraulic..clicks or tapping noise..goes away
Hello, I have a 1998 RAM 2500 HD with a V-10 gas and at least one noisy hydraulic lifter?....It makes clicks or tapping noise at startup and gradually goes away. SO, the question(s) is: Would a heavie… read more
mackin1
mackin1
Vocational, Technical or Trade Scho
216 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

< Previous | Next >

Meet the Experts:

Jerry

Jerry

Master Mechanic

1,754 satisfied customers

ASE Master tech, 30 years exp. troubleshooter, driveability tech

Chris

Chris

Shop Foreman

8,424 satisfied customers

Dodge/Cummins and Chrysler Certified Master Tech

Mopar Certified

Mopar Certified

Dodge Technician

6,786 satisfied customers

24 Year Chrysler/Dodge Certified Specialist

moparfl

moparfl

ASE Certified Technician

3,292 satisfied customers

ASE Master Tech Gold level Chrysler Status 30 years dealership exp

Dodgerench

Dodgerench

ASE Certified Technician

2,850 satisfied customers

30+ years Dodge/Chrysler exp., ASE Master with L1 certification. Driveability/ combustion specialist

Tim Mohr

Tim Mohr

ASE MASTER TECH

2,479 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Chris (aka-Moose)

Chris (aka-Moose)

Technician

2,286 satisfied customers

24 years of experience diagnosing & repairing

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x