Dodge

Dodge Repair Questions? Ask a Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Dodge Questions
Are there different seals for the front axles on a 2000
are there different seals for the front axles on a 2000 Dodge Ram 1500 4x4 and what one should i get … read more
Kevin
Kevin
Owner Kevins Mobile repair
Associate Degree
889 satisfied customers
My 2014 Ram 1500 blows warm air when a/c is on. I've already
My 2014 Ram 1500 blows warm air when a/c is on. I've already charged the freeon but its still not getting cold … read more
sprinkles08
sprinkles08
Chrysler/Dodge/Jeep master tech
High School or GED
26,194 satisfied customers
1990 Dodge Ram 50 4x4 2.4, no start. I can't get it to
I can't get it to start. Been sitting for 3 years and when the previous owner started having problems he had it scanned. Was told distributor was going out. He priced it at 245 from AutoZone and parked it instead. So after I got my hands on it I've found the notorious ECM capacitors leaking thing. Got another ECM and I'm getting responses from my TPS and the main relay is clicking now. I've drained all fuel and put fresh in. New distributor, coil, wires, and plugs. Still nothing. I tested the fuel pressure last night and I've got around 50 when cranking. So I kinda leaning towards my injectors are stopped up or froze up. … read more
Amedee
Amedee
Automotive Consultant
Vocational, Technical or Trade Scho
21,783 satisfied customers
Misfire in cylinder 1 oil pressure sensor circuit and says
Misfire in cylinder 1 oil pressure sensor circuit and says the wrong oil type dodge just did a 100k Mike tune up and ain't had nothing but problems since they touched it … read more
sprinkles08
sprinkles08
Chrysler/Dodge/Jeep master tech
High School or GED
26,194 satisfied customers
Found oil in my radiator. 2 months ago. 2007 dodge charger
well if its easy enough yeah. so far i have checked to see if i have a blown head gasket i used a engine block tester … read more
sprinkles08
sprinkles08
Chrysler/Dodge/Jeep master tech
High School or GED
26,194 satisfied customers
2009 5.7 Hemi 1500 Ram, pulled out in front of a semi that
2009 5.7 Hemi 1500 Ram, pulled out in front of a semi that ws speeding, (my bad) Flored the truck, excelerated whell but i felt somthing happen in the power train,. Drove fine rest of the trip, 80 mil… read more
Kurt Mulling
Kurt Mulling
Lead Technician/ now retired
High School or GED
761 satisfied customers
Check engine light on with code p0660. It currently stays
It currently stays on. Just changed battery 2 weeks ago and starter 1 week ago. Car started with no problems, no warning lights for 3 days. Then won't start, lighting bolt warning light stayed on, then check engine light came on blinking, lighting bolt light went off but engine light blinked for a while then went solid. Code reader gave code p0660, some sites said to clear code and then see what happened. So cleared code, car started, after a few moments check engine light came on solid. code still reading p0660, only code showing. Car is starting, but hear clicking noise. wondering whether to replace manifold tuning valve. … read more
sprinkles08
sprinkles08
Chrysler/Dodge/Jeep master tech
High School or GED
26,194 satisfied customers
I just ran obd scanner seem to have a few codes with my
I just ran obd scanner seem to have a few codes with my truck I just bought last week. … read more
Ricardo Hohl
Ricardo Hohl
Auto Motive Instructor
Automotive tech
4,563 satisfied customers
My husband hooked up two 12” led light strips to a hot wire
my husband hooked up two 12” led light strips to a hot wire by the ignition on my 2013 Dosge Ram 1500 and now the truck will not start. All the lights come on and it just clicks He disconnected the li… read more
sprinkles08
sprinkles08
Chrysler/Dodge/Jeep master tech
High School or GED
26,194 satisfied customers
I have a 2012 ram 1500 and lost all power to the radio. When
Hello I have a 2012 ram 1500 and lost all power to the radio. When I checked the fuse it was ok. what else could it be? … read more
David Craig
David Craig
OWNER/MECHANIC
Associates
10,536 satisfied customers
I have an 2002 dodge ram 1500 I need to know wiring diagram
I have an 2002 dodge ram 1500 I need to know wiring diagram … read more
AutoDoc1
AutoDoc1
High School Diploma
5,053 satisfied customers
2017 1500 Hemi has had the check engine light on since a
2017 1500 Hemi has had the check engine light on since a friend changed the oil. Assumed he hit a vacuum line possibly. Hadn't had time to take it in. Not today, it just won't start. Turns over strong… read more
Mechanic01
Mechanic01
9,709 satisfied customers
Code P0129. I just replaced cam and lifters on my 2014 RAM
Code P0129. I just replaced cam and lifters on my 2014 RAM 1500 w/5.7. Struggling to get it running right again. P0129, low barometric pressure, cannot be reset. Disconnected battery, tried to erase w… read more
David Craig
David Craig
OWNER/MECHANIC
Associates
10,536 satisfied customers
1997 Dodge Ram 1500: be the right transmission to order when ordering
I'm looking for a 1997 Dodge Ram 1500 V8, 5.9l transmission. What would be the right transmission to order when ordering through used transmission shops?… read more
jazzmaster
jazzmaster
LEAD AUTO TECH
Vocational, Technical or Trade Scho
2,873 satisfied customers
2007 RAM 1500 5.7 HEMI, 50K miles on her. My oil pressure
2007 RAM 1500 5.7 HEMI, 50K miles on her. My oil pressure gage dropped to zero so stopped and I had the truck towed to a shop. They tested the sending unit and oil pressure then replaced the sending u… read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
2004 Ram 1500: it has a 5.7 hemi..ticking noise..seafoam..lifter
I have a 2004 Ram 1500, it has a 5.7 hemi. The engine has a ticking noise, the ticking quit for about a week after I added some seafoam to the oil but it now stop. lifter? push rod? how hard and costl… read more
Chris
Chris
Shop Foreman
7,943 satisfied customers
Loud Ticking Noise When Starting 08 Dodge Ram 1500
I have an 08 Dodge Ram 1500 with a 4.7 V8. It is making a loud tick noise at startup when the engine is cold. It sounds like a lifter but its a overhead cam engine. what do you think it could be, ther… read more
quickcar
quickcar
High School or GED
1,688 satisfied customers
96 Ram 1500 4x4: V8..warmed..the cam and all the lifters..oil pressure
I have a 96 Ram 1500 4x4 5.9L V8. The valve lifters are getting noticeably noisey but only after the engine is warmed up (5-10 minutes). Its been a good motor for 230k miles but should I replace the c… read more
sprinkles08
sprinkles08
Chrysler/Dodge/Jeep master tech
High School or GED
26,194 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

< Previous | Next >

Meet the Experts:

Jerry

Jerry

Master Mechanic

1,754 satisfied customers

ASE Master tech, 30 years exp. troubleshooter, driveability tech

Chris

Chris

Shop Foreman

7,943 satisfied customers

Dodge/Cummins and Chrysler Certified Master Tech

Mopar Certified

Mopar Certified

Dodge Technician

6,417 satisfied customers

24 Year Chrysler/Dodge Certified Specialist

moparfl

moparfl

ASE Certified Technician

3,292 satisfied customers

ASE Master Tech Gold level Chrysler Status 30 years dealership exp

Dodgerench

Dodgerench

ASE Certified Technician

2,850 satisfied customers

30+ years Dodge/Chrysler exp., ASE Master with L1 certification. Driveability/ combustion specialist

Tim Mohr

Tim Mohr

ASE MASTER TECH

2,465 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Chris (aka-Moose)

Chris (aka-Moose)

Technician

1,991 satisfied customers

16 years of experience

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x