Dodge

Dodge Repair Questions? Ask a Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Dodge Questions
2011 ram 1500 5.7 hemi p0300 p0339 p0108. Replaced Map
2011 ram 1500 5.7 hemi p0300 p0339 p0108 JA: Are you fixing your Ram 1500 yourself? What have you tried so far? Customer: replaced Map sensor and crank sensor JA: Does the vehicle stall at low speeds?… read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
19,756 satisfied customers
Jus cam and lifters in 2012 ram 5.7 hemi. It cranks and runs
Jus cam and lifters in 2012 ram 5.7 hemi. It cranks and runs but runs very ruff and throw 8 different codes. It didn't before repair what's my problem … read more
Mopar Certified
Mopar Certified
Dodge Technician
Vocational, Technical or Trade Scho
6,295 satisfied customers
2011 1500 pu 57 hemi had a cam installed heads runs bad. And
2011 1500 pu 57 hemi had a cam installed heads runs bad. And only will run with the y pipe disconected. Has p0300 misfire. … read more
Mopar Certified
Mopar Certified
Dodge Technician
Vocational, Technical or Trade Scho
6,295 satisfied customers
2009 1500 5.7 hemi dealer says I may have a collapsed lifter
2009 1500 5.7 hemi dealer says I may have a collapsed lifter or worn cam. don't understand how this can happen. Wouldn't it throw a code before it went bad? … read more
Thomas Ragusa
Thomas Ragusa
Chrysler Certified Technician
174 satisfied customers
Replaced cam and now the engine won't start, Bought a new
Replaced cam and now the engine won't start JA: Have you checked the battery, particularly the terminal connections? Are they corroded? Customer: Bought a new battery JA: What is the model/year of you… read more
Robert R
Robert R
Auto Technician
Vocational, Technical or Trade Scho
5,366 satisfied customers
I have a 2004 dodge ram 5.7 hemi. It broke a valve spring
I have a 2004 dodge ram 5.7 hemi. It broke a valve spring last year. I replaced all the valve springs in both heads plus had the passanger head pulled! I had a bad lifter on cylinder 2 same as the spr… read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
19,756 satisfied customers
My name is ***** *****. I have a 2007 ram 1500 with the
Customer: My name is ***** *****. I have a 2007 ram 1500 with the hemi. Sam e ordeal. #7 misfires. Alot. engine light is on. Shakes and rumbles till warm. shut it off and restart, smoothes out and run… read more
Dodgerench
Dodgerench
ASE Certified Technician
Vocational, Technical or Trade Scho
2,850 satisfied customers
Ram 1500: I have a 2009 Ram 1500 SLT with a 5.7 Hemi engine.
I have a 2009 Ram 1500 SLT with a 5.7 Hemi engine. 83,xxx miles. At high RPM (4000 and up) at any throttle position, the engine starts to miss. It continues to miss thru all RPM until I shut off and r… read more
-Brad-
-Brad-
Foreman Dodge Dealership
Vocational, Technical or Trade Scho
8,266 satisfied customers
How strong/durable are the MDS lifters on the 2009 5.7 Hemi?
How strong/durable are the MDS lifters on the 2009 5.7 Hemi? I bent the heck out of a intake push rod, how can I tell if the lifter is okay and does not need replacement? C clip in place, seat is worn… read more
sprinkles08
sprinkles08
Technician
High School or GED
18,928 satisfied customers
Dodge Ram 1500: I have a 2004 Dodge Ram 1500. The hemi motor
I have a 2004 Dodge Ram 1500. The hemi motor in the truck is 5.7 LT magnum motor. The problem I have is on the passenger side of the motor, I have a ticking sound coming from the lifters. what can i d… read more
Pete
Pete
Automotive Diagnostic Specialist
General auto certifications
33,185 satisfied customers
I have a mopar 360 hp in my 73 satellite,motor is a la
i have a mopar 360 hp in my 73 satellite,motor is a la block,bored .030 over and zero decked with speed pro 10:1 pistons,heads are 1994 magnum with oil through lifters and push rods,motor ran great at… read more
RIP ROBERT
RIP ROBERT
OWNER
High School or GED
761 satisfied customers
2004 Jeep Liberty: cyl..000 miles..bad.(Sounded really loud..intake
2004 Jeep Liberty 6 cyl , dual overhead cams. 160,000 miles. This jeep was running poorer and poorer till it started rapping bad.(Sounded really loud with that plastic intake). Thought I was gonna hav… read more
-Brad-
-Brad-
Foreman Dodge Dealership
Vocational, Technical or Trade Scho
8,266 satisfied customers
2004 dodge durango: engine will stall..crank..pop the hood for 2..cool
I have a 2004 dodge durango 4.7 that on warm days when the engine is warmed up the engine will stall at an idle and won't restart. It will just crank but won't catch when I try to restart. I can pop t… read more
Dodge expert
Dodge expert
ASE MASTER TECH, REPAIR FACILITY OWNER
High School or GED
3,636 satisfied customers
1995 ram, oil presure is good (50psi)..first start..warms..it drops
1995 ram, oil presure is good (50psi) when I first start the truck. As it warms up while driving after 5 or 10 min. it drops slowly to below zero. If I raise the RPM or put it under load during the fi… read more
Ricardo Hohl
Ricardo Hohl
Auto Motive Instructor
Automotive tech
4,422 satisfied customers
2001 ram 2500: 5.9 will backfire under load..revved..park
heres what i'm trying to figure out, seems theres multiple problems. 1. My 2001 ram 2500, 5.9 will backfire under load when cold. 2. theres a knocking sound when the engine is revved up when in park, … read more
Tom
Tom
Professor, Auto Technology
Bachelor's Degree
862 satisfied customers
Dodge: adjusting..intake/exhaust valves on my 1997 5.9 V8
What is the procedure for adjusting the intake/exhaust valves on my 1997 5.9 V8 Dodge Ram? (The rocker arms are Mopar performance roller rocker arms, 1.6 ratio)… read more
rich
rich
Associate Degree
366 satisfied customers
1997 caravan: noise coming..my mechanic..cam on cylinder#4 exhaust
I have a 1997 caravan. I had a ticking noise coming from the motor, so I took it to my mechanic. While the engine was hot, the mechanic found the noise, removed the front valve cover, and started it u… read more
sprinkles08
sprinkles08
Technician
High School or GED
18,928 satisfied customers
On a 1968 plymouth 383, is there a correct way..tappet..backwards
On a 1968 plymouth 383, is there a correct way and incorrect way to install the rocker shafts? I have tappet noise on one side and thought that the rocker shaft my be on backwards or upside down.… read more
Rudolph Diesel
Rudolph Diesel
Service manager/ Master mechanic
Vocational, Technical or Trade Scho
1,918 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

< Previous | Next >

Meet the Experts:

Jerry

Jerry

Master Mechanic

1,754 satisfied customers

ASE Master tech, 30 years exp. troubleshooter, driveability tech

Chris

Chris

Shop Foreman

7,702 satisfied customers

Dodge/Cummins and Chrysler Certified Master Tech

Mopar Certified

Mopar Certified

Dodge Technician

6,295 satisfied customers

24 Year Chrysler/Dodge Certified Specialist

moparfl

moparfl

ASE Certified Technician

3,292 satisfied customers

ASE Master Tech Gold level Chrysler Status 30 years dealership exp

Dodgerench

Dodgerench

ASE Certified Technician

2,850 satisfied customers

30+ years Dodge/Chrysler exp., ASE Master with L1 certification. Driveability/ combustion specialist

Tim Mohr

Tim Mohr

ASE MASTER TECH

2,434 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Chris (aka-Moose)

Chris (aka-Moose)

Technician

1,832 satisfied customers

16 years of experience

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x