Dodge

Dodge Repair Questions? Ask a Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Dodge Questions
Dodge ram 1500 4wd: 2004 dodge ram 1500. I installed a new
2004 dodge ram 1500. I installed a new rack and pinion last evening. The steering wheel is now off about 2/3 of a turn. there is not enough adjustment on the tie rod ends to fix the problem. I checked… read more
Mopar Certified
Mopar Certified
Dodge Technician
Vocational, Technical or Trade Scho
6,295 satisfied customers
I have a 1978 dodge w150 with a 440 when u turn the key to
I have a 1978 dodge w150 with a 440 when u turn the key to start and have it turned all the way it fires up. As soon as u release the key it dies. I put a new ignition switch in it allready… read more
Dr. Hamman
Dr. Hamman
Vocational, Technical or Trade Scho
6,151 satisfied customers
1500 Ram: I live in northern Alberta and the nights are getting
I live in northern Alberta and the nights are getting frosty. I have a 2003 Dodge 1500, 4.7 litre standard transmission. My heater fan isn't working properly, but when I wiggle the key in the ignition… read more
sprinkles08
sprinkles08
Technician
High School or GED
18,986 satisfied customers
2003 Dodge Ram 1500 crew cab 4X4 heater/AC blower is running
2003 Dodge Ram 1500 crew cab 4X4 heater/AC blower is running very slow without assistance. Found when I apply slight clockwise pressure to ignition key fan will run normal speed, but if i let off the … read more
Dodge expert
Dodge expert
ASE MASTER TECH, REPAIR FACILITY OWNER
High School or GED
3,636 satisfied customers
1989 Caravan: new ignition cylinder..key/ignition..sterring column
My 1989 Caravan needs a new ignition cylinder, (the key jamed and the key would not turn to the off position). To get at the key/ignition cylinder, I cannot even seem to get the panels off. To get thi… read more
Eric
Eric
Retired
N/A
37,676 satisfied customers
1985 Dodge Ramcharger: the ignition switch, that..dashboard..harness
I have a 1985 Dodge Ramcharger. The tilt steering column required replacement and I need a wiring diagram for the ignition switch, that is attached to the column, under the dashboard. The 2 columns I … read more
kalamykid
kalamykid
Pactor automotive
Vocational, Technical or Trade Scho
6,019 satisfied customers
Dodge: ignition switch and steering wheel tilt lever assembly
I have a Dodge 250 1989 truck that I need directions and schematic for replaceing the ignition switch and steering wheel tilt lever assembly.… read more
moparfl
moparfl
ASE Certified Technician
Vocational, Technical or Trade Scho
3,292 satisfied customers
1987 dodge dakota: get the ignition lock out to replace it..tilt
I am having the same problem another person aked about in the past. I cant' get the ignition lock out to replace it. it is a 1987 dodge dakota no tilt. The key won't go in. The Haynes manual says to r… read more
Randall C
Randall C
Auto Technician / Consultant
Vocational, Technical or Trade Scho
13,392 satisfied customers
1998 dodge ram 2500: 12v..my truck..cranking..steering column
I have a 1998 dodge ram 2500 with a 12v cummins diesel. i had a mechanic work on my truck due to it not cranking. he ran a wire from the steering column to the starter to fix it. it cranks now but i h… read more
moparfl
moparfl
ASE Certified Technician
Vocational, Technical or Trade Scho
3,292 satisfied customers
1987 dodge: an ignition key lock and switch and need help
bought an ignition key lock and switch and need help getting the old one out on a 1987 dodge decote. instructions in box very bad. can you help with this?… read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
1989 Dodge Dakota: steering column..the ignition key socket assembly
1989 Dodge Dakota standard steering column. I am trying to replace the ignition key socket assembly because a key is broken off inside. I have been using the Factory Dakota shop manual and Haynes Dako… read more
Tim Mohr
Tim Mohr
ASE MASTER TECH
Master's Degree
2,434 satisfied customers
1985 dodge: ram..wheel drive..loose..removed the steering wheel.
I have an 1985 dodge power ramXXXXXw150 318ci. The steering is very loose. I have removed the steering wheel. How do I remove the next section where the blinker lever and ignition is ? Russell… read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
1995 dodge: 4wd..pickup and my ignition switch has failed..assembly
i have a 1995 dodge 4wd pickup and my ignition switch has failed. when i put the key in it will not turn and it feels like there is nothing touching the key. can the internals of the switch be removed… read more
Petek
Petek
Automotive Technician
Bachelor's Degree
156 satisfied customers
Dodge: with 85k orig..Recently I had the engine fail to turn..culprit
I have an ''86 Dodge Ram Van 250 with 85K orig. miles on it. Recently I had the engine fail to turn off when the key is turned to the "off" position, leaving me with two questions: what is the likely … read more
mndave0002
mndave0002
Associate Degree
250 satisfied customers
85 dodge: van..the column trying to steal it..kill switch
To make a long story short I have an 85 dodge ram conversion van 318 with a loaded column. Last year someone drilled out the ignition on the column trying to steal it. Fortunately I installed a kill s… read more
tom
tom
Associate Degree
46 satisfied customers
1983 dodge: the start position it runs but if i let it go it dies
i have a 1983 dodge ram if i hold the key at the start position it runs but if i let it go it dies. what do i need to do??… read more
ase_master327
ase_master327
Owner & Student
High School or GED
3,214 satisfied customers
dodge 440: ignition switch..ballast resistor and ecm..pulling
I have a dodge 440, when I turn the ignition switch off, keeps running I have replaced the ballast resistor and ECM with spares that I had and tried cutting the "ignition" wire from ign sw. nothing wo… read more
RIP
RIP
Lead Technician
Vocational, Technical or Trade School
469 satisfied customers
83 DODGE: THE IGNITION SWITCH..STEERING WHEEL..STEERING COLUMN..OFF.
HOW DO I REPLACE THE IGNITION SWITCH IN A 83 DODGE RAM 150 TRUCK? I GOT THE STEERING WHEEL OFF, BUT CAN'T GET THE SECTION OG THE STEERING COLUMN THAT HOUSES THE IGNITION SWITCH OFF.… read more
Don - Mo Lurch
Don - Mo Lurch
Owner
Vocational, Technical or Trade Scho
11,086 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

< Previous | Next >

Meet the Experts:

Jerry

Jerry

Master Mechanic

1,754 satisfied customers

ASE Master tech, 30 years exp. troubleshooter, driveability tech

Chris

Chris

Shop Foreman

7,702 satisfied customers

Dodge/Cummins and Chrysler Certified Master Tech

Mopar Certified

Mopar Certified

Dodge Technician

6,295 satisfied customers

24 Year Chrysler/Dodge Certified Specialist

moparfl

moparfl

ASE Certified Technician

3,292 satisfied customers

ASE Master Tech Gold level Chrysler Status 30 years dealership exp

Dodgerench

Dodgerench

ASE Certified Technician

2,850 satisfied customers

30+ years Dodge/Chrysler exp., ASE Master with L1 certification. Driveability/ combustion specialist

Tim Mohr

Tim Mohr

ASE MASTER TECH

2,434 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Chris (aka-Moose)

Chris (aka-Moose)

Technician

1,832 satisfied customers

16 years of experience

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x