Dodge

Dodge Repair Questions? Ask a Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Dodge Questions
HOW DO REMOVE THE FLYWHEEL ADAPTER PLATE ON A 07 DODGE 3500
HOW DO REMOVE THE FLYWHEEL ADAPTER PLATE ON A 07 DODGE 3500 WITH THE G56 … read more
Chris Carr
Chris Carr
Ase Master
Ase Master Tech
463 satisfied customers
I am having issue with my clutch line popping out from the
i am having issue with my clutch line popping out from the slave cylinder … read more
sprinkles08
sprinkles08
Technician
High School or GED
18,981 satisfied customers
Loud noise when transmission is in idle, depress clutch
Loud noise when transmission is in idle, depress clutch noise stops, noise in all six gears and Idling, vibrations at base of shifter, replaced clutch and clutch pad, and fly wheel. I dont recall repl… read more
Gary
Gary
Gold Certified Technician
Vocational, Technical or Trade School
2,379 satisfied customers
Dodge Ram 3500: I have a 2006 Dodge Ram 3500 with 5.9 Cummings
I have a 2006 Dodge Ram 3500 with 5.9 Cummings engine guy I got it from put several upgrades on the truck such as a edge programmer , a high performance harmonic balancer, and a south bend clutch now … read more
Tim Mohr
Tim Mohr
ASE MASTER TECH
Master's Degree
2,434 satisfied customers
Ram 3500: I'm in the final stages of closing on a R 3500 G56
I'm in the final stages of closing on a R 3500 G56 Cummins. From all homework solid except for the dual mass clutch. Pickup has 67,000 miles but when it was used, it was towing a 5th wheel camper. App… read more
-Brad-
-Brad-
Foreman Dodge Dealership
Vocational, Technical or Trade Scho
8,266 satisfied customers
Ram 2500: Hi, I have a 03 Dodge Cummins 2500 4x4 nv5600 transmission.
Hi, I have a 03 Dodge Cummins 2500 4x4 nv5600 transmission. The transmission input shaft bearing seized up about a year ago so I had a shop install South Bend Clutch part no. 1947-OFEK (clutch flywhee… read more
Robert R
Robert R
Auto Technician
Vocational, Technical or Trade Scho
5,382 satisfied customers
Ram 2500: I have a 2005 Dodge Ram 2500 with a 5.9 cummins
I have a 2005 Dodge Ram 2500 with a 5.9 cummins automatic. I just got finished putting new injectors in it as the old ones went to crap. After I got done, the truck runs great except at wide open thro… read more
Richard
Richard
Shop foreman/Lead technician
Vocational, Technical or Trade Scho
4,140 satisfied customers
Dodge RAM 3500 4x4: I had a repair shop replace the dual mass
I had a repair shop replace the dual mass fly wheel and put in new solid fly wheel, clutch, pressure plate,throw out bearing and pilot bearing in my 2007 dodge ram 3500 with 6 speed and 6.7 diesel now… read more
-Brad-
-Brad-
Foreman Dodge Dealership
Vocational, Technical or Trade Scho
8,266 satisfied customers
2006 dodge: clutch..rear main seal..damper pulley..1500 rpm
I have a bad vibration from the engine it is constunt with the rpm I put it in gear with the clutch in makes no difference moving or standing still makes no difference the clutch works great the rear … read more
Richard
Richard
Shop foreman/Lead technician
Vocational, Technical or Trade Scho
4,140 satisfied customers
dodge: 4500 cummins with 6speed..replaced clutch and went..fly wheel .
dodge 4500 cummins with 6speed . replaced clutch and went to a heavy duty with a 13 in. fly wheel . now there is very little peddle , enguages maybe 1 in off floor . it is a napa joho clutch, didnt di… read more
Mopar Certified
Mopar Certified
Dodge Technician
Vocational, Technical or Trade Scho
6,295 satisfied customers
Dodge: 6.7 3500 cummins i just put a clutch in 300 mile age..driven
I have a dodge 6.7 3500 cummins i just put a clutch in 300 mile age an now i cant get it in gear with the cluch in but let the cluch out a ways it will go in . driven down the road it will slip when i… read more
sprinkles08
sprinkles08
Technician
High School or GED
18,981 satisfied customers
2006 Dodge Ram 3500: tranny..5.9 Truck..installed new..master
2006 Dodge Ram 3500 6 speed Tranny. 5.9 Truck is acting like clutch is not working properly. We installed new clutch kit and master/slave cylinder. After bleeding master and slave clutch worked perfec… read more
garrtim
garrtim
SERVICE MANAGER
2,271 satisfied customers
1995 Dodge Ram 2500: four wheel drive..my clutch..slip..haul
I have a four wheel drive 1995 Dodge Ram 2500 p/u with the 5.9 Cummins diesel and the nv4500 "5 speed transmission." In the past couple of months my clutch has started to slip and make racket when i s… read more
Ironmike
Ironmike
ASE Master ,Ford Certified Master Tech
Vocational, Technical or Trade Scho
3,475 satisfied customers
Automatic..a chatter upon moving in low gear only..Goes away..MPH.
Have a 2008 Mega Cab dullie/ with automatic 6 speed. Has a chatter upon moving in low gear only. Goes away at about 2 MPH. Heaver the load, the worse the chatter. Truck has 31000 miles. Have had drive… read more
Richard
Richard
Shop foreman/Lead technician
Vocational, Technical or Trade Scho
4,140 satisfied customers
2001 dodge: diesel..my clutch and pressure plate..slipping..flywheel
I have a 2001 dodge ram diesel with a 6 speed. I've recently got my clutch and pressure plate replaced because the old one was slipping, this for the second time in less than 2 years. But after the re… read more
Richard
Richard
Shop foreman/Lead technician
Vocational, Technical or Trade Scho
4,140 satisfied customers
I have a 1993 motor home with a cummins 5.9..Allison..trans
I have a 1993 motorhome with a cummins 5.9 and an Allison 6 speed automatic My rear main seal is leaking. I have removed the trans and fly wheel. my question is: do i have to remove the adapter plate … read more
Jerry
Jerry
Master Mechanic
Vocational, Technical or Trade Scho
1,754 satisfied customers
Turbo..the trans there is plenty of meet left on the clutch plate
hello I am having trouble with my g56 trans the fly wheel does not seem to be working properly it slipps when I get into the turbo I pulled the trans there is plenty of meet left on the clutch plate a… read more
sprinkles08
sprinkles08
Technician
High School or GED
18,981 satisfied customers
Ram 1500: speed manual transmission..clutch,pressure plate, throw
I have a Ram 1500 with a 5 speed manual transmission. I have replaced the clutch,pressure plate, throw-out bearing,pilot bearing,clutch master cylinder and slave cylinder. I followed the instructions … read more
Virtual Wrench
Virtual Wrench
Owner of LJ Auto Repair 37 years
Associate Degree
14,420 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

< Previous | Next >

Meet the Experts:

Jerry

Jerry

Master Mechanic

1,754 satisfied customers

ASE Master tech, 30 years exp. troubleshooter, driveability tech

Chris

Chris

Shop Foreman

7,702 satisfied customers

Dodge/Cummins and Chrysler Certified Master Tech

Mopar Certified

Mopar Certified

Dodge Technician

6,295 satisfied customers

24 Year Chrysler/Dodge Certified Specialist

moparfl

moparfl

ASE Certified Technician

3,292 satisfied customers

ASE Master Tech Gold level Chrysler Status 30 years dealership exp

Dodgerench

Dodgerench

ASE Certified Technician

2,850 satisfied customers

30+ years Dodge/Chrysler exp., ASE Master with L1 certification. Driveability/ combustion specialist

Tim Mohr

Tim Mohr

ASE MASTER TECH

2,434 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Chris (aka-Moose)

Chris (aka-Moose)

Technician

1,832 satisfied customers

16 years of experience

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x