Dodge

Dodge Repair Questions? Ask a Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Dodge Questions
I have a 2002 Dodge Ram 1500 5.9l. I need a new engine
I have a 2002 Dodge Ram 1500 5.9l. I need a new engine wiring harness but they are no longer available. So I would like a schematic of the 3 plugs that go into the ecm so I can rebuild the old one. … read more
Roy
Roy
shop foreman
Associate Degree
4,581 satisfied customers
2012 Ram 1500 Tradesman 4x2 Crew Cab ST. Lot's of rain last
2012 Ram 1500 Tradesman 4x2 Crew Cab ST. Lot's of rain last few weeks. Lots of water inside, under the rear bench seat. Both sides. :-( … read more
Thomas Ragusa
Thomas Ragusa
Network Systems Administration
154 satisfied customers
ram 2500: , do you have a good, detailed drawing of where
Hi, do you have a good, detailed drawing of where the engine wiring harness connects to the main truck harness on both a 1994 and 1997 Dodge ram 2500 diesel pickup? The connectors are nailed to the fi… read more
Expert
Expert
Ram 1500 SLT: OK....you did well with my Cruise Control Problem.
OK....you did well with my Cruise Control Problem. I've left an Excellent feedback and a small bonus. Thanks for your help. Now I have another question about the same vehicle ('02 Ram 1500, 5.9 V-8 Ga… read more
Richard
Richard
Shop foreman/Lead technician
Vocational, Technical or Trade Scho
4,140 satisfied customers
my 94 dodge intrepid 3.5 will crack but not start. i just
my 94 dodge intrepid 3.5 will crack but not start. i just finished installing the heads after a bad head gasket. i have touble checked the timing, i have blue sparks on the spark plugs, compression is… read more
Dodge expert
Dodge expert
ASE MASTER TECH, REPAIR FACILITY OWNER
High School or GED
3,636 satisfied customers
dodge ram 1500: 2wd..solenoid..to scan tool..second gear limp mode
06 dodge ram 1500 4.7 2wd not flex fuel codes for range sensor replaced solenoid pack tryed to do quick relearn cant get trans fluid hot enough according to scan tool for relearn what are we missing v… read more
jeepmopar76
jeepmopar76
Master tech
Vocational, Technical or Trade Sc
1,222 satisfied customers
The 1994-97 5.2 Y engine with/ without egr hole..swap..intake
What is the difference with the 1994-97 5.2 Y engine with/ without egr hole? Can you just swap the intake, and the rest of the engine is the same?… read more
Chris
Chris
Shop Foreman
7,095 satisfied customers
manafold that is causing it to leak, Im..is and is really loud
I bought A truck yesterday and there looks like a part missing off the manafold that is causing it to leak, I'm not sure but it may be part of a header maybe. I have a pic of it but have no idea how I… read more
Paul M ASE Master
Paul M ASE Master
Automotive College
4,537 satisfied customers
99 dakota: it was poping missing and dieing..chevy..diagnostics
recently bought a 99 dakota 5.2. got a deal because it was poping missing and dieing. I typcally work on chevys but figred this shouldnt be that hard. started basic diagnostics. the truck ran how ever… read more
Virtual Wrench
Virtual Wrench
Owner of LJ Auto Repair 37 years
Associate Degree
14,398 satisfied customers
94 ram 1500: rotor..harness..each cylinder on the intake manifold
i just change dist cap and rotor on 94 ram 1500 with 318 and there was a plug above the distr that i had to undo.. i now cant find one side of it and truck wont start... it has three wires and the sid… read more
Chris
Chris
Shop Foreman
7,095 satisfied customers
1994 ram 2500: manifold..wiring harness..vacum..salvage yard
I'm putting a 2000 5.9 360 gas motor in my 1994 ram 2500 which has a 5.9 motor in it already. We changed the manifold because of the wiring harness and the vacum lines. The motor was tested by the sal… read more
Amedee
Amedee
Automotive Consultant
Vocational, Technical or Trade Scho
19,665 satisfied customers
durango: I put my 2000 4.7..electrical..stu of the #4 spark plug coil
I put my 2000 4.7 durango back together after a crash. There is one female electrical recepacle mounted on the stu of the #4 spark plug coil. I cannot find a cable antwhere to plug into this. There ar… read more
Mopar Certified
Mopar Certified
Dodge Technician
Vocational, Technical or Trade Scho
6,073 satisfied customers
2000 dakota: quad cab..v8..107,000 miles something happened..slides
I have a 2000 dakota 4x4 quad cab 4.7 v8 which I bought new. Yesterday with 107,000 miles something happened to the 4x4 gear shifter. Now the shifter just slides up and down freely. I think some pins … read more
jeepmopar76
jeepmopar76
Master tech
Vocational, Technical or Trade Sc
1,222 satisfied customers
Rpm..leaks..this r.p.m. range.It idles and runs great other than
I just replaced the plenum and intake gaskets on my 2000 d-2500 4x4 . When driving under hard acelleration from 1800 to 2700 rpm's there is a loud sucking sound from the t.b area.I have triple checked… read more
Mopar Certified
Mopar Certified
Dodge Technician
Vocational, Technical or Trade Scho
6,073 satisfied customers
02 Dakota: engine started..knocking noise..few minutes..under load
I have an '02 Dakota with 160k miles. Recently the engine started making a very slight knocking noise when I start it, but it went away after a few minutes of driving. Today it started missing under l… read more
sprinkles08
sprinkles08
Chrysler/Dodge/Jeep master tech
High School or GED
24,549 satisfied customers
2000 dodge: catalytic..emissions..valves..exhust under cab
I just bought a used truck, 2000 dodge 2500, 8.0 the catalytic conveters are not hooked up to the return tube from the emissions pump. Also missing the one way valves, Am i hurti9ng the truck to drive… read more
ProAnswerMan
ProAnswerMan
ASE Master Technician
Associate Degree
408 satisfied customers
Dodge: vaccum..drops..they told me the lower intake gasket was blown
had truck on computer at dodge yesturday. vaccum starts at 19 and drops to about 11. they told me the lower intake gasket was blown. replaced it and upper gaskets, replaced map sensor, plugs, wires an… read more
sprinkles08
sprinkles08
Chrysler/Dodge/Jeep master tech
High School or GED
24,549 satisfied customers
Pickup: ram..The seatbelt comes from the cab and not through the seat
Will a 40 20 40 seat from a 2005 ram pickup fit into a 94 ram pickup? The seatbelt comes from the cab and not through the seat itself. Any modifications? Or where can I find a good new replacement as … read more
74duster
74duster
Vocational, Technical or Trade Scho
134 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

< Previous | Next >

Meet the Experts:

Jerry

Jerry

Master Mechanic

1,754 satisfied customers

ASE Master tech, 30 years exp. troubleshooter, driveability tech

Chris

Chris

Shop Foreman

7,095 satisfied customers

Dodge/Cummins and Chrysler Certified Master Tech

Mopar Certified

Mopar Certified

Dodge Technician

6,073 satisfied customers

24 Year Chrysler/Dodge Certified Specialist

moparfl

moparfl

ASE Certified Technician

3,292 satisfied customers

ASE Master Tech Gold level Chrysler Status 30 years dealership exp

Dodgerench

Dodgerench

ASE Certified Technician

2,822 satisfied customers

30+ years Dodge/Chrysler exp., ASE Master with L1 certification. Driveability/ combustion specialist

Tim Mohr

Tim Mohr

ASE MASTER TECH

2,363 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Don - Mo Lurch

Don - Mo Lurch

Aftermarket & Factory Electronics

1,593 satisfied customers

Cert. Dodge & Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x