How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jerry Your Own Question
Jerry
Jerry, Master Mechanic
Category: Dodge
Satisfied Customers: 1754
Experience:  ASE Master tech, 30 years exp. troubleshooter, driveability tech
2947720
Type Your Dodge Question Here...
Jerry is online now
A new question is answered every 9 seconds

I have a 2009 Dodge Dakota 4.7 with aluminum heads I'm

Customer Question

I have a 2009 Dodge Dakota 4.7 with aluminum heads I'm replacing them exhaust manifold gasket what is the proper torque exit 18 foot pounds
JA: OK. To minimize me, please click the down arrow at the top right corner of this box.
Customer: M
JA: Okay, I'll connect you to the mechanic to go over that information regarding your Ram Dakota. Before I do, is there anything else you want him to know?
Customer: No
Submitted: 2 months ago.
Category: Dodge
Expert:  Gunvir Singh replied 2 months ago.

HEllo, let me review your request. Please stand by.

Expert:  Gunvir Singh replied 2 months ago.

Attached is the factory provided torque specifications for exhaust manifold and heat shield.

Customer: replied 2 months ago.
Should I use and Anti see and or lock tight.
Expert:  Gunvir Singh replied 2 months ago.

Sorry about the wait, my system was out for repair. Antiseize will be good.