How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask -Brad- Your Own Question
-Brad-
-Brad-, Dodge Dealership Tech
Category: Dodge
Satisfied Customers: 7837
Experience:  16 Yrs Chrysler/Dodge Technician. ASE Master Certified(L-1)
10114124
Type Your Dodge Question Here...
-Brad- is online now
A new question is answered every 9 seconds

I think i am having ecm issues, 2006 ram 3500 5.9, yes.

Customer Question

i think i am having ecm issues
JA: What is the model/year of your Dodge?
Customer: 2006 ram 3500 5.9
JA: Are you fixing your Ram yourself? What have you tried so far?
Customer: yes. changed crank sensor
JA: Does the vehicle stall at low speeds? Does it sputter?
Customer: very ruff idle when starting and 19v to passenger side batterey
JA: Anything else you want the mechanic to know before I connect you?
Customer: i have a banks six gun tuner installed
Submitted: 12 days ago.
Category: Dodge
Expert:  -Brad- replied 12 days ago.

Good afternoon and welcome to JustAnswer!!

My name is ***** ***** I have worked for a Chrysler-Dodge-Jeep dealership for 19 years and I will do my best to help.

Have you connected a scantool to see what codes are setting? If yes can you post the codes here so I can get a idea on what's going on? If your going to fix this yourself we will need to do some fuel tests and the first one will be a fuel delivery test. I will need for you to disconnect the line to the CP3 pump and bump the starter and tell me if your getting 500ml in 10 sec. If yes then using a scantool what is the rail psi when starting? A Cummins needs 5,000 rail psi to start.. If low then you will need to start blocking off injectors until the rail psi rises and then replace the bad injector..

Let me know,

Brad

Expert:  -Brad- replied 12 days ago.

The battery's will overcharge if you have bad connections.. I would start by disconnecting and cleaning all 4 terminals and then see if it's still overcharging.. Also I would load test each battery and if one if bad replace both is pairs...

Expert:  -Brad- replied 13 hours ago.

I see you haven't rated yet which means I have not been credited for helping. If you still need help you can reply to me anytime before or after the rating...

Thank you and have a great day,

Brad

Related Dodge Questions