How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask -Brad- Your Own Question
-Brad-
-Brad-, Dodge Dealership Tech
Category: Dodge
Satisfied Customers: 7993
Experience:  16 Yrs Chrysler/Dodge Technician. ASE Master Certified(L-1)
10114124
Type Your Dodge Question Here...
-Brad- is online now
A new question is answered every 9 seconds

My 99 cummins started died 3 times now so start doors don't

Customer Question

My 99 cummins started died 3 times now so start doors don't lock and my security light d9nt flash when I turn key on
JA: Have you checked the fuses? Have you checked the door switches?
Customer: Yes and yes I hanged the iod fuse and that's when it started
JA: What is the model of your '99 Dodge?
Customer: Ram 3500 Laramie
JA: Are you fixing your Ram yourself? What have you tried so far?
Customer: Well I took it to shop cuz I really didn't have time but they said I mention pump but iknw that's not the problem
JA: Anything else you want the mechanic to know before I connect you?
Customer: No ma'am
Submitted: 4 months ago.
Category: Dodge
Expert:  -Brad- replied 4 months ago.

Good evening and welcome to JustAnswer!!

My name is ***** ***** I have worked for a Chrysler-Dodge-Jeep dealership for 19 years and I will do my best to help.

Do you know what codes are setting and if the shop is able to communicate with the Central Timer Module(CTM)? The CTM controls the door locks and the security and fails often.. Ask the shop to check the CTM..

Customer: replied 4 months ago.
No Check engine light and no codes
Expert:  -Brad- replied 4 months ago.

Codes in the CTM will not trigger a check engine light.. You will need a scantool and not a cheap code reader to retrieve the codes.. If your not able to communicate with the CTM then it's locked up and it will need to be replaced.. You can try a 10 min battery disconnect but if that doesn't help then it will need to be replaced...

Customer: replied 4 months ago.
shop said thurs no codes
Customer: replied 4 months ago.
Undid batter all night still nothing
Expert:  -Brad- replied 4 months ago.

Did they check the CTM and if they can communicate with the CTM then go into DATA and look at Security and see if it says "Ok to start" or not...

Customer: replied 4 months ago.
I will check tomorrow thank u
Expert:  -Brad- replied 4 months ago.

You are very welcome...

Keep me posted,

Brad

Customer: replied 4 months ago.
I checked all my fuses they wur all good but I took the one for my locks out for the iod fuse that's was the problem thank u
Expert:  -Brad- replied 4 months ago.

If you need anymore assistance feel free to shoot me a reply and don't forget to RATE 5 Stars before leaving the site so I get credit for helping you today..

Have a great day,

Brad