How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask -Brad- Your Own Question
-Brad-, Dodge Dealership Tech
Category: Dodge
Satisfied Customers: 7945
Experience:  16 Yrs Chrysler/Dodge Technician. ASE Master Certified(L-1)
Type Your Dodge Question Here...
-Brad- is online now
A new question is answered every 9 seconds

2002 intrepid .. have camshaft position sensor code, car

Customer Question

2002 intrepid .. have camshaft position sensor code , car runs fine if cruise light will come on ....bucks, intermittent miss if light does not come on.. sometimes wiper timing will be off ,,, but only when cruise control light will not come on....sometimes will reset light itself..have replaced timing chain, composition sensor and bought used computer
JA: While using the cruise control can you accelerate or decelerate? Have you checked the fuses?
Customer: Fuse for what??? Cruise?? Wipers , cam position??
JA: What is the make/model of your car?
Customer: 2002 dodge intrepid 2.7 v6
JA: Are you fixing your Intrepid yourself? What have you tried so far?
Customer: Code was cam position.. replaced twice, then computer, then time chain and gears
JA: Anything else you want the mechanic to know before I connect you?
Customer: No don't think so , also noticed wiper timing off on occasion
Submitted: 9 months ago.
Category: Dodge
Expert:  -Brad- replied 9 months ago.

Good morning and welcome to JustAnswer!!

My name is ***** ***** I have worked for a Chrysler-Dodge-Jeep dealership for 19 years and I will do my best to help.

Have you replaced the camshaft and crankshaft position sensors?

Customer: replied 9 months ago.
Camshaft has been not crankshaft
Expert:  -Brad- replied 9 months ago.

Ok the cruise light will flash when the PCM detects the timing out of spec, so since you have had the timing chain replaced and the camshaft sensor then I would replace the crankshaft sensor and you should be in good shape..

If you need anymore assistance feel free to shoot me a reply and don't forget to RATE before leaving the site so I get credit for helping you today..

Have a great day,


Customer: replied 9 months ago.
Brad, replaced crankshaft position sensor ...still doing same thing any suggestions?
Expert:  -Brad- replied 9 months ago.

What is the exact P code that is setting?

Customer: replied 9 months ago.
344 camshaft position sensor and know doing 441 evap as well
Customer: replied 9 months ago.
Brad also the cruise light does not flash simply goes out or will not come on at all