How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, Chrysler/Dodge/Jeep master tech
Category: Dodge
Satisfied Customers: 22986
Experience:  ASE Master and Advanced Certified, Chrysler/Dodge/Jeep Master Certified, Trans and Hybrid Specialist
Type Your Dodge Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

What's the charge before i elicit info from you sir

Customer Question

Hello what's the charge before i elicit info from you sir
Submitted: 10 months ago.
Category: Dodge
Customer: replied 10 months ago.
2007 dodge grand caravan 3.3L codes P0700 P0734 P0732 P0871 P0846 P0841 I removed input and output sensors and ohm tested them input 725. output 667
Customer: replied 10 months ago.
Here's my question
I have a 2007 Dodge Grand Caravan with codes P0700 P0734 P0732 P0871 P0846 and P0841
No limp mode condition
Will go forward after rpms increase yet no reverse action present.
No grinding noise either
Customer: replied 10 months ago.
Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Expert:  sprinkles08 replied 10 months ago.

Hello and welcome to JustAnswer!

You have a couple of different issues going on there. The gear ratio error codes along with lack of reverse do unfortunately point to a broken clutch hub or geartrain failure. The 2/4 and reverse clutches transmit power through the same hub to the geartrain.

When you take off from a stop the first time after starting the engine what happens when it should shift into second?