How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary, ASE Certified Technician
Category: Dodge
Satisfied Customers: 1119
Experience:  Senior Technician
Type Your Dodge Question Here...
Gary is online now
A new question is answered every 9 seconds

Replaced a number 3 injector. batteries disconnected

Customer Question

replaced a number 3 injector. batteries disconnected everything went well on install. before i installed the valve cover i started the truck. Truck ran for a few seconds and then the check engine light came on and i shut the engine off. i can turn the truck over but before i do i hear a clicking and check engine light is blinking
JA: Has the vehicle been scanned for codes?
Customer: no sorry step it did have a #3 injector open
JA: What is the model/year of your Dodge?
Customer: 2006 2500 ram 5.9 cummings'
JA: Are you fixing your 1500 yourself? What have you tried so far?
Customer: just r2 the #3 injector
JA: Anything else you want the mechanic to know before I connect you?
Customer: not sure what to ask
Submitted: 11 months ago.
Category: Dodge
Expert:  Gary replied 11 months ago.

Hi there,

The engine wasn't sealed, that's why the engine light is on.

Has probably logged a mass airflow sensor code.


Customer: replied 11 months ago.
P2609 on the dash key
Expert:  Gary replied 11 months ago.

Ok, I'll come back with some info shortly.


Expert:  Gary replied 11 months ago.

Hi again,

Maybe you something disconnected?

The code is as follows:

Hope this helps.


Expert:  Gary replied 10 months ago.

Hi there,

Do you still need help with this problem?