Dodge

Dodge Repair Questions? Ask a Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Dodge Questions
I have a 2011 ram 3500 6.7 Cummins fully deleted, the
I have a 2011 ram 3500 6.7 Cummins fully deleted, the exhaust brake worked up until I deleted it, now if I uninstall the tuner and put it back to stack the exhaust brake will work but only at idle, an… read more
Justin
Justin
Master Technician
T.D. Automotive Technology
239 satisfied customers
I have a 2013 Ram 3500 with a 6.7 Cummins and I am trying to
I have a 2013 Ram 3500 with a 6.7 Cummins and I am trying to get the drive cycles to set so I can smog it. … read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
24,396 satisfied customers
Engine code reads po732, wont shift, does not allow turbo
engine code reads po732, wont shift, does not allow turbo boost, starts out moving then freewheels,let off throttle then bangs into gear, goes 40 mph at 2000rpn, thats it. another code u0001 … read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
24,396 satisfied customers
Engine keeps throwing code p0106. I changed map sensor. 2020
Engine keeps throwing code p0106 . I changed map sensor . 2020 ram 3500 6.7 H.O. WARRANTY HAS REPLACED TURBO, ECM,EGR VALVE, EGR COOLER,AMD DPT. PROBLEMS STARTED AROUND 20,000 MILES. TWO DIFFERENT RAM… read more
garrtim
garrtim
SERVICE MANAGER
2,320 satisfied customers
Have a code pop up p2262 turbo boost pressure not detected.
Have a code pop up p2262 turbo boost pressure not detected . Noticed that the solid yellow wire is exposed and that's my fault. I installed a catch can and never security from moving around . Catch ca… read more
Chris (aka-Moose)
Chris (aka-Moose)
Technician
2,539 satisfied customers
I have a 2008 dodge 2500 6.7 cummins. I need to rebuild my
I have a 2008 dodge 2500 6.7 cummins. I need to rebuild my turbo. Can i replace the bearings and seals without having to re-calibrate the actuator? I was told that if I do not remove the actuator from… read more
Keiphun Sowell
Keiphun Sowell
Owner Brothers Restoration/Troubleshoot
AutoDiesel Technology
2,600 satisfied customers
It has been deleted heads studded and a bully dog programmer
It has been deleted heads studded and a bully dog programmer and it keeps throwing these codes P003A P0046 P0405 U010C P00AF butt it run good?? Can I do anything to fix it … read more
Chris (aka-Moose)
Chris (aka-Moose)
Technician
2,539 satisfied customers
Diesel vehicle mechanic. I have a 2012 Dodge Ram 3500
This question is for a diesel vehicle mechanic. I have a 2012 Dodge Ram 3500 Laramie Longhorn Mega Cab. I have deleted the EGR and the exhaust. I am running a EZ Lynk tuner with Anarchy Diesel tunes. … read more
Eric
Eric
51,624 satisfied customers
2011 Cummins idle but won't go passed 1000rpm. 100k 6.7. Ram
2011 Cummins idle but won't go passed 1000rpm JA: How many miles are on the Dodge? What size is the engine? Customer: 100k 6.7 JA: What is the model of your '11 Dodge? Customer: Ram 3500 JA: Are you f… read more
Mopar Certified
Mopar Certified
Dodge Technician
Vocational, Technical or Trade Scho
7,419 satisfied customers
I have oil blowing out of the throttle valve. 2016 3500 6.7
I've deleted the egr dpf and def put a new turbo in it and replaced the ccv filter … read more
Andrew
Andrew
Master Diagnostic Technician
Associate of Occupational in Automotive Technology
580 satisfied customers
P00af and p003a code just camn on the other day trying to
p00af and p003a code just camn on the other day trying to figure out what i have to do to fix the problem … read more
william readon
william readon
NONE
1,899 satisfied customers
Dodge Ram 3500: I have 2011 ram 3500 6.7 Cummings I lost the
I have 2011 ram 3500 6.7 Cummings I lost the exhaust brake and the only code is showing is Mass air flow and crankshaft filter. Both part has been change. It has the daf kit deleted. Running a h s min… read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
24,396 satisfied customers
I have a 2012 6.7 Pre DEF Cummins. DPF is filter is full
I have a 2012 6.7 Pre DEF Cummins. DPF is filter is full Dodge wants 3k to clean. What are options for an bypass exhaust kit. Local exhaust shops will not touch it due to Phoenix city emissions. I'm w… read more
Tim Mohr
Tim Mohr
ASE MASTER TECH
Master's Degree
2,479 satisfied customers
Ram 2500: Have a 2012 RAM that has currently lost boost on
Have a 2012 RAM that has currently lost boost on the turbo. It is blowing all kinds of smoke and won't go past 20mph.… read more
Chris
Chris
Shop Foreman
8,691 satisfied customers
dodge ram 3500 6.7 cummins: ok...my head gasket blew on my
ok...my head gasket blew on my 2007 6.7 cummins. It was replaced with an APR premium set up ie: all new studs and rings ect. It has both the EGR delete and dpf delete. Now the motor cant get out of it… read more
b5demon
b5demon
Automotive Technician
Vocational, Technical or Trade Scho
3,829 satisfied customers
Ram 3500: I have a 2007.5 Dodge 3500 6.7 cummins. Went to
I have a 2007.5 Dodge 3500 6.7 cummins. Went to tow boat yesterday and engine would not rev about about 1200 rpm and would hesitate and buck. Idles just fine. Got P2262 CEL (no turbo pressure). Ran fi… read more
mike the mechanic
mike the mechanic
auto technician
High School or GED
132 satisfied customers
Dodge RAM 3500 4x4: 2007 dodge 3500 6.7 cummins. Egr cooler/valve
2007 dodge 3500 6.7 cummins. Egr cooler/valve delete, cold air intake, straight 5in. Exhaust. Edge juice. Once warm starts smoking horribly and sounds like exhaust brake is constantly on. Doesn't smel… read more
garrtim
garrtim
SERVICE MANAGER
2,320 satisfied customers
Dodge: 6.7 litre cummins dtc fault po607 motor..limp home mode
i have a dodge 3500 6.7 litre cummins dtc fault po607 motor runs terrible must be in limp home mode cant drive. how do i fix or delete code. po607.… read more
Dodge expert
Dodge expert
ASE MASTER TECH, REPAIR FACILITY OWNER
High School or GED
3,636 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

< Previous | Next >

Meet the Experts:

Jerry

Jerry

Master Mechanic

1,754 satisfied customers

ASE Master tech, 30 years exp. troubleshooter, driveability tech

Chris

Chris

Shop Foreman

8,691 satisfied customers

Dodge/Cummins and Chrysler Certified Master Tech

Mopar Certified

Mopar Certified

Dodge Technician

7,419 satisfied customers

24 Year Chrysler/Dodge Certified Specialist

moparfl

moparfl

ASE Certified Technician

3,292 satisfied customers

ASE Master Tech Gold level Chrysler Status 30 years dealership exp

Dodgerench

Dodgerench

ASE Certified Technician

2,850 satisfied customers

30+ years Dodge/Chrysler exp., ASE Master with L1 certification. Driveability/ combustion specialist

Chris (aka-Moose)

Chris (aka-Moose)

Technician

2,539 satisfied customers

24 years of experience diagnosing & repairing

Tim Mohr

Tim Mohr

ASE MASTER TECH

2,479 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x