How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask -Brad- Your Own Question
-Brad-, Dodge Dealership Tech
Category: Dodge
Satisfied Customers: 7828
Experience:  16 Yrs Chrysler/Dodge Technician. ASE Master Certified(L-1)
Type Your Dodge Question Here...
-Brad- is online now
A new question is answered every 9 seconds

I'm having tipm related issues too. Mine got fried so I

Customer Question

I'm having tipm related issues too. Mine got fried so I needed a new one. Bought a Dorman reman. Right off the bat it threw 3 codes for service 4wd, coolant fan relay and fuel pump control open. Had them replace it and the 2nd new one is now throwing 3 new codes; fuel rail psi signal- above max limit, high psi common rail checksum error,Fuel pump relay control.. do these reman ones need to be programmed? When I put the old original on there's no error codes only the ac doesn't work
Submitted: 10 months ago.
Category: Dodge
Expert:  -Brad- replied 10 months ago.
The TIPM will need to be reconfigured with a WiTech scantool to add all the vehicle options. We(dealership) charge 1hour labor which is around $110.00 to program them.