How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask cwalkerjr21 Your Own Question
cwalkerjr21, Auto Mechanic
Category: Dodge
Satisfied Customers: 711
Experience:  Shop training and experience.
Type Your Dodge Question Here...
cwalkerjr21 is online now
A new question is answered every 9 seconds

Have a code on my 2005 ram 3500 p1756, the c e light comes

Customer Question

have a code on my 2005 ram 3500 p1756
JA: Have you scanned the code? Have you tried to reset it?
Customer: the c e light comes on then after a few starts goes off the transe is not shifting right
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: if i can i will fix it just started doing the funny shifting a few days age so i have not done anything yet just check the code reader
JA: Anything else you think the mechanic should know?
Customer: every thing looks good other wise t oil good not smell burnt and full
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Dodge Mechanic about your situation and then connect you two.
Submitted: 1 year ago.
Category: Dodge
Expert:  cwalkerjr21 replied 1 year ago.

Good evening, what engine is in your dodge truck?

Customer: replied 1 year ago.
Expert:  cwalkerjr21 replied 1 year ago.
  • Check for the presence of other A/T related trouble codes
  • Governor pressure sensor has failed
  • Transmission valve body has failed
  • Transmission has internal damage
  • Governor pressure sensor reference (5v) circuit is open
  • ECM has failed

Those are the possible causes of P1756 I would start by Test the actual governor pressure with a gauge on the governor pressure test port. If it is 0 then it is an internal transmission problem. If the pressure is reading on the gauge then the problem is likely with the pressure sensor inside the transmission.