How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Amedee Your Own Question
Amedee, Dodge Technician
Category: Dodge
Satisfied Customers: 26221
Experience:  ASE certified tech advanced level specialist. Wisconsin certified emissions state inspector
Type Your Dodge Question Here...
Amedee is online now
A new question is answered every 9 seconds

How do i remove the starter on 1988 dodge colt vesta w/ 2.0

Customer Question

how do i remove the starter on 1988 dodge colt vesta w/ 2.0 mitsuhishi motor?
Submitted: 1 year ago.
Category: Dodge
Expert:  Amedee replied 1 year ago.

Disconnect the battery ground (negative) cable from the battery.

Jack up and support (use a jackstand) the driver's side of the car.

Tag and remove the wires connected to the starter motor. Tagging the wires helps when reinstalling the starter motor.

Loosen and remove the two mounting bolts, make sure to support the weight of the starter motor.

To install:

Before installation of the motor, be sure to clean the mating surfaces of both the starter and the engine block.

Place the starter motor into position. Secure it with the mounting bolts. Connect the cables and wiring harness.

Expert:  Amedee replied 1 year ago.