How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jerry Your Own Question
Jerry, Master Mechanic
Category: Dodge
Satisfied Customers: 1754
Experience:  ASE Master tech, 30 years exp. troubleshooter, driveability tech
Type Your Dodge Question Here...
Jerry is online now
A new question is answered every 9 seconds

My 05 hemi is running terrible its very hesitant and stalled

Customer Question

My 05 hemi is running terrible its very hesitant and stalled today when i let off the gas as well as fluctuation in rpms. Changed plugs wires coils an still doing it. Gonna change tb soon anything else it could be?!
JA: Thanks. Can you give me any more details about your issue?
Customer: Thats everything
JA: OK got it. Last thing — Dodge Mechanics generally expect a deposit of about $18 to help with your type of question (you only pay if satisfied). Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Submitted: 1 year ago.
Category: Dodge
Expert:  I. Silva replied 1 year ago.

Hello...welcome and thank you for using Justanswer.

Have you scan the vehicle for trouble codes ?

Is the check engine light ON or does it blink when it running rough ?

Let me know.

Thank you very much.

Customer: replied 1 year ago.
Scaned it and no codes come back... Its blinked a couple times while running bad but not always.. No check engine light on.
Expert:  I. Silva replied 1 year ago.

I would try to get the check engine light to blink and then scan it to see what kind of trouble codes show up.

There are some problems with the throttle body but also before that you have to make sure there is good fuel pressure and the gas is not contaminated (water in it )

Let me know.

Thank you.

Customer: replied 1 year ago.
When the check engine light was on the code said multiple misfires.
Expert:  I. Silva replied 1 year ago.

I would check the fuel pressure ad take a sample of the gas into a plastic container to check for water.

Make sure there is no vacuum leaks and if possible check the fuel trims >(will need a scanner with live data)

Let me know.

Thank you.