Dodge

Dodge Repair Questions? Ask a Mechanic for Answers ASAP

Ask an Expert,
Get an Answer ASAP!

Related Dodge Questions
Im changing the cv axel....the tire side came out ok, the
I'm changing the cv axel....the tire side came out ok, the side towards the tranny won't break loose...when I did get it to break loose, the part that it connects to is coming out as well....… read more
Robert R
Robert R
Auto Technician
Vocational, Technical or Trade Scho
879 satisfied customers
Dodge RAM 2500 4x4: 47re sometimes wont shift 1-2 and 2-3.
47re sometimes won't shift 1-2 and 2-3. If I put it in nuetral and back into drive then it will change gears.… read more
Themaxview
Themaxview
Vocational, Technical or Trade Scho
20 satisfied customers
We were driving down the road and the engine just died. Did
We were driving down the road and the engine just died. Did not jump timing and the fuel pump still works. It cranks, but won't turn over.… read more
Brad
Brad
Technician at Dodge Dealership
Vocational, Technical or Trade Scho
12 satisfied customers
Dodge town and country: I have a 2001 Town and Country 3.8
I have a 2001 Town and Country 3.8 eng.with traction control. The front brakes are the issue. I made a routine front brake pad change but after driving about 15 miles the right front brake locked up a… read more
Chris
Chris
Shop Foreman
7,095 satisfied customers
Dodge Ram 1500: drive my..bearing shot..front axle..use 4 wheel drive
Can I drive my Dodge Ram 1500 pick up with the bearing shot in the u-joint on the passenger side front axle shaft as long as I don't useXXXXX I mean short term just until I replace the axle shaft.… read more
Amedee
Amedee
Dodge Technician
28,522 satisfied customers
Dodge: My 2003 ram wont start..Runs great..same problem
My 2003 Ram won't start without a quick shot of ether. Runs great once it's started, have changed the low pressure lift pump and filter. Looked online and see many other owners with the same problem a… read more
Mopar Certified
Mopar Certified
Dodge Technician
Vocational, Technical or Trade Scho
6,073 satisfied customers
01 Durango: grinding sound that started coming..2wd..engage
I have a grinding sound that started coming from underneath my '01 Durango today. It is really loud when in 2wd and somewhat quieter in 4wd High; however, the 4wd H/L does not actually engage anymore.… read more
sprinkles08
sprinkles08
Technician
High School or GED
11 satisfied customers
1999 dakota: crank..wont start.after..key switch..again...gauges
my 1999 dakoda runs very good.but a lot of times it shots off while its running.when it shots off,it will crank.but won"t start.after turning the key switch off and on for a while it will start again.… read more
DODGETECH2875
DODGETECH2875
Vocational, Technical or Trade Scho
1,004 satisfied customers
new one..shifting..problem because the voltage reg is in the ecu im
my altnator quit charging and i bought a new one and its still not charging and its not shifting anymore someone told me this was the ecu causing the problem because the voltage reg is in the ecu im n… read more
DODGETECH2875
DODGETECH2875
Vocational, Technical or Trade Scho
1,004 satisfied customers
2001 Ram was eating gas and vibrating very bad now today..wont start
2001 Ram was eating gas and vibrating very bad now today it won't start it will turn over but no fire it seems.Any help would be great thanks… read more
sprinkles08
sprinkles08
Technician
High School or GED
11 satisfied customers
dodge: My 04..cummings p/u throttle tends to stick..smoothly
My 04 Dodge Cummings p/u throttle tends to stick or becomes hard to push down after it has reached running temp. It also won't upshift smoothly until it is pushed past the hard spot.… read more
DODGETECH2875
DODGETECH2875
Vocational, Technical or Trade Scho
1,004 satisfied customers
1998 dodge truck: 2500 4x4..cummins..gages..the idot lights work
I have a 1998 dodge truck 2500 4x4 12 valve cummins tanny won't go into over drive and dash cluster no gages work but the idot lights work… read more
DODGETECH2875
DODGETECH2875
Vocational, Technical or Trade Scho
1,004 satisfied customers
1996 ram 1500: a rebuilt auto transmission..4x4..wheel drive
I have installed a rebuilt auto transmission in a 1996 ram 1500, 4x4. TheXXXXXdoes not work. The front drive line is rotating but front tires won't spin. I Tested this on ice. I don't think the front … read more
garrtim
garrtim
SERVICE MANAGER
1,831 satisfied customers
2004 DODGE INTREPID: CRUISE CONTROL..GOING DOWN..CLUTCH..REALLY SHAKES
I HAVE A 2004 DODGE INTREPID WITH THE 3.5 MOTOR, IT IS HAVING SEVERAL PROBLEMS, I CAN HAVE THE CRUISE CONTROL ON AND IT GOES OFF BY ITSELF, THE CAR WILL GO DEAD GOING DOWN THE ROAD, IT CAN BE HARD TO … read more
Dodgerench
Dodgerench
ASE Certified Technician
Vocational, Technical or Trade Scho
2,822 satisfied customers
1995 Dodge Dakota: engage..the right front axle..left front
I have a 1995 Dodge Dakota four wheel drive that has suddenly started to bang loudly on the right front when I try to engage the 4WD. It sounds like the right front axle is broken but it's not. The le… read more
autoracer
autoracer
High School or GED
22 satisfied customers
Bearing..the 3rd member apart to pull the axle..local shop
I am trying to pull the axle to replace the axle bearing. It looks like I have to take the 3rd member apart to pull the axle. I was told by a local shop that it could cost as much as $1200. They said … read more
Kevin
Kevin
ASE CERTIFIED MECHANIC
330 satisfied customers
1996 caravan: liter..reverse..van jumped and made a horrible bang
1996 caravan 3.3 liter. I pat it in reverse and the van jumped and made a horrible bang but wouldn't go anywhere. Same in drive. When I put it in gear and give it gas I can feel the engine trying to g… read more
Tony Noble
Tony Noble
Service Manager
Associate Degree
148 satisfied customers
1991 Dodge Caravan: driving down..die..wont start..It will crank
I have a 1991 Dodge Caravan and when you are driving down the road it will just die and won't start back up. We have changed every sencor and even the ECM. It will crank over we just don't get any fir… read more
VirtualWrench (L J)
VirtualWrench (L J)
Owner of LJ Auto Repair 37 years
Associate Degree
38 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

< Previous | Next >

Meet the Experts:

Jerry

Jerry

Master Mechanic

1,754 satisfied customers

ASE Master tech, 30 years exp. troubleshooter, driveability tech

Chris

Chris

Shop Foreman

7,095 satisfied customers

Dodge/Cummins and Chrysler Certified Master Tech

Mopar Certified

Mopar Certified

Dodge Technician

6,073 satisfied customers

24 Year Chrysler/Dodge Certified Specialist

moparfl

moparfl

ASE Certified Technician

3,292 satisfied customers

ASE Master Tech Gold level Chrysler Status 30 years dealership exp

Dodgerench

Dodgerench

ASE Certified Technician

2,822 satisfied customers

30+ years Dodge/Chrysler exp., ASE Master with L1 certification. Driveability/ combustion specialist

Tim Mohr

Tim Mohr

ASE MASTER TECH

2,363 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Don - Mo Lurch

Don - Mo Lurch

Aftermarket & Factory Electronics

1,593 satisfied customers

Cert. Dodge & Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x