How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jerry Your Own Question
Jerry, Master Mechanic
Category: Dodge
Satisfied Customers: 1754
Experience:  ASE Master tech, 30 years exp. troubleshooter, driveability tech
Type Your Dodge Question Here...
Jerry is online now
A new question is answered every 9 seconds

My turn signals went out in my 1999 dodge durango. I

Customer Question

My turn signals went out in my 1999 dodge durango. I replaced the relay and still no signals.
Submitted: 1 year ago.
Category: Dodge
Expert:  SARMIENTO22556 replied 1 year ago.

if none of the signals are working and you have replaced the flasher, I suspect the turn signal switch and/or the connector are at fault.

are you going to try to troubleshoot this yourself? do you have access to a volt meter?

Customer: replied 1 year ago.
I have a volt meter.
Expert:  SARMIENTO22556 replied 1 year ago.

1. At the multifunction switch, jumper the Red wire to the Dark Green/Red and the Light Green/Yellow wires, and the left side turn signals should flash. If they do, the switch is bypassed, so it would be a bad turn Multifunction Switch.

2. If they are on but do not flash, then it is a flasher-based problem, bad Combination Flasher, or incorrect power or ground to it.

Expert:  SARMIENTO22556 replied 1 year ago.

the turn signal is part of the multifunction switch