Dodge

Dodge Repair Questions? Ask a Mechanic for Answers ASAP

Ask an Expert,
Get an Answer ASAP!

Related Dodge Questions
Replaced cam. and crank sensors still code 1391 on 01 ram
replaced cam. and crank sensors still code 1391 on 01 ram 1500 2w/d … read more
-Brad-
-Brad-
Foreman Dodge Dealership
Vocational, Technical or Trade Scho
8,211 satisfied customers
It dies while I'm driving, 1999 Ram 1500 5.9L 4X4, I've
I've replaced the PCM, Crank sensor, cam sensor, cap and rotor I get a 'NoBus' code when it dies - seems to happen when it heats up. I've also check and improved the grounds I could find … read more
Robert R
Robert R
Auto Technician
Vocational, Technical or Trade Scho
4,937 satisfied customers
Dodge ram 1500: 99 ram 1500, I had a p1391 code come up. A
99 ram 1500, I had a p1391 code come up. A lot. So I changed the whole front of my motor timing chain pump hoses figured do it all. Along with 1391 I had bucking usually 3rd gear 3000-3750 rpms (nv350… read more
sprinkles08
sprinkles08
Technician
High School or GED
18,067 satisfied customers
Dodge ram 1500: My 97 Dodge 1500 ram intermittently will not
My 97 Dodge 1500 ram intermittently will not start when hot. The check engine light is usually on but occasionally does go off. I ran your start the ignition test and the codes seemed to be: 12 54 56.… read more
Ric
Ric
Associate Degree
152 satisfied customers
ram 1500: i have a 96 ram 1500 and has a p 1391 code. i have
i have a 96 ram 1500 and has a p 1391 code. i have replaced the crank sensor,cam sensor, plugs, wires,dist cap,rotor,iac,tps, main computor and it runs fine but continues to trip that code. any ideas?… read more
Wayne Crawford
Wayne Crawford
3,928 satisfied customers
1998 dodge avenger: misfire..coil..its idling real high..intermittent
i have a 1998 dodge avenger i was having a misfire problem so i changed the cap rotor and coil and now its idling real high then low never consistant and its giving me a P1391 code intermittent loss o… read more
-Brad-
-Brad-
Foreman Dodge Dealership
Vocational, Technical or Trade Scho
8,211 satisfied customers
1999 dodge dakota: the check engine light is..EVAP..LEAK..MALFUNCTION
I have a 1999 dodge dakota with a 5.2 and the check engine light is on. I pulled the code and I got. Po455 EVAP LARGE LEAK P0420 CAT BELOW THRESHOLD P1391 MALFUNCTION CONTROL IGNITION MISFIRE. I belie… read more
Chad
Chad
Lead Auto Tech/Shop foreman
Associate Degree
1,114 satisfied customers
98.1500 dodge ram v6 2 wh.drive 1391 comes up change 3 times..
98.1500 dodge ram v6 2 wh.drive 1391 comes up change 3 times..got 2 blocks away stalls out light comes back on..tried 2 start yesterday 1391 still on now 320 sayin crank secor.. Is it the brain going … read more
Tim Mohr
Tim Mohr
ASE MASTER TECH
Master's Degree
2,363 satisfied customers
Dodge Dakota SLT I have a 98 Dakota 3.9 2wd it will intermittently
I have a 98 Dakota 3.9 2wd it will intermittently die and sometimes backfire through the exhaust. It will startup right away. It will do it at an idle, at highway speeds, and anywhere in between. The … read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
96 Dodge: keeps coming..plug wires and the distributor cap and rotor
My 96 Dodge Ram MIL keeps coming on and the usual code is P0300. Sometimes I also get other codes like P0301, P0302, P0307, P0306. I just changed the plugs, plug wires and the distributor cap and roto… read more
David Dill
David Dill
Master Level Chrysler Technician
High School or GED
834 satisfied customers
2001 dodge ram 2500: liter..intermittent..distributor..cap, rotor
I have a 2001 dodge ram 2500 5.9 liter is used for plowing it would not start the code said p1391 intermittent cam sensor crank sensor signal so I replaced the crank sensor and it started but it runs … read more
Dodge expert
Dodge expert
ASE MASTER TECH, REPAIR FACILITY OWNER
High School or GED
3,636 satisfied customers
1995 neon: we replaced cam sensor and wiring harness.
we have a 1995 neon that gives us a 1391 code. we replaced cam sensor and wiring harness. what is the fix for this problem.… read more
Mopar Certified
Mopar Certified
Dodge Technician
Vocational, Technical or Trade Scho
6,073 satisfied customers
2000 dodge Durango: timing chain..now when i accelerate past 50 MPH.
I have a 2000 dodge Durango that lost a timing chain on left side. I installed a new chain and cylander head. now when i accelerate past 50 MPH. it starts to buck a code of1361 comes on. I have change… read more
sprinkles08
sprinkles08
Technician
High School or GED
18,067 satisfied customers
1999 DODGE DAKOTA: CHECK ENGINE LIGHT..INTERMITTENT..GETS WARM..STALL
I HAVE A 1999 DODGE DAKOTA 3.9 MOTOR. A CODE 1391 HAS TRIGGERED THE CHECK ENGINE LIGHT, INTERMITTENT LOSS OF CMP OR CKP. THE TRUCK GETS WARM AND STALL OUT. IT STARTS RIGHT BACK UP. I REPLACED THE CAP … read more
moparfl
moparfl
ASE Certified Technician
Vocational, Technical or Trade Scho
3,292 satisfied customers
2000 DODGE: bank one..two) and P1391(ignition system or misfire
I'M STILL LOOKING FOR HELP WITH A 2000 DODGE RAM. THE CODES ARE P0138(bank one/sensor two) and P1391(ignition system or misfire) any suggestions?… read more
john
john
High School or GED
254 satisfied customers
97 dodge Intrepid: throttle..tach..crank sensor, cam sensor
Have a 97 dodge Intrepid 3.5 kicks a code 1391 intermittently. under part throttle cuts out rpms drop lose 500rpms on tach. have replaced crank sensor, cam sensor, plugs wires, coil pack, tried used P… read more
Dodgerench
Dodgerench
ASE Certified Technician
Vocational, Technical or Trade Scho
2,822 satisfied customers
95 Stratus: a 2.0L engine and 5 speed manual..engine started..miss
I have a 95 Stratus with a 2.0L engine and 5 speed manual (150K miles). During the past month or 2 the engine started to occationally miss (falter) very briefly while driving. Lately this seems to be … read more
Leo
Leo
Associate Degree
572 satisfied customers
1997 Dodge: 1996 engine..harness..Timing set..timing light
1997 Dodge Ram getting 1391 code. Truck has built 1996 engine and 1996 controller, however 1997 harness. Timing set by professional with timing light, fuel synch dead on at 0. Still throws 1391. Repla… read more
Leo
Leo
Associate Degree
572 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

< Previous | Next >

Meet the Experts:

Jerry

Jerry

Master Mechanic

1,754 satisfied customers

ASE Master tech, 30 years exp. troubleshooter, driveability tech

Chris

Chris

Shop Foreman

7,095 satisfied customers

Dodge/Cummins and Chrysler Certified Master Tech

Mopar Certified

Mopar Certified

Dodge Technician

6,073 satisfied customers

24 Year Chrysler/Dodge Certified Specialist

moparfl

moparfl

ASE Certified Technician

3,292 satisfied customers

ASE Master Tech Gold level Chrysler Status 30 years dealership exp

Dodgerench

Dodgerench

ASE Certified Technician

2,822 satisfied customers

30+ years Dodge/Chrysler exp., ASE Master with L1 certification. Driveability/ combustion specialist

Tim Mohr

Tim Mohr

ASE MASTER TECH

2,363 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Don - Mo Lurch

Don - Mo Lurch

Aftermarket & Factory Electronics

1,593 satisfied customers

Cert. Dodge & Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x