How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jerry Your Own Question
Jerry, Master Mechanic
Category: Dodge
Satisfied Customers: 1754
Experience:  ASE Master tech, 30 years exp. troubleshooter, driveability tech
Type Your Dodge Question Here...
Jerry is online now
A new question is answered every 9 seconds

Cranks but no start plug in code reader and starts right up

Customer Question

Cranks but no start plug in code reader and starts right up
Submitted: 1 year ago.
Category: Dodge
Expert:  Reggie Whiddon replied 1 year ago.

Are you getting any codes? What type coder reader you using. I've seen this before couple times wound up being pcm. But let's take it from the top you say it spins want crank, have you checked fuel pressure, and ignition spark

Customer: replied 1 year ago.
With code reader plugged in the truck starts and runs fine no codes present un plug code reader and truck cranks but won't start
Expert:  Reggie Whiddon replied 1 year ago.

Okay I recommend checking all the powers and grounds at the ecm, I've had this before a few times actually, it would up being either a bad ecm or broken ground wires. With the reader unplugged whst is causing the no start? Does it have fuel pressure, spark, injector pulse?