How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask -Brad- Your Own Question
-Brad-, Dodge Dealership Tech
Category: Dodge
Satisfied Customers: 7828
Experience:  16 Yrs Chrysler/Dodge Technician. ASE Master Certified(L-1)
Type Your Dodge Question Here...
-Brad- is online now
A new question is answered every 9 seconds

Per our last conversation I try an xperament. had key/fod in

Customer Question

tim per our last conversation I try an xperament. had key/fod in truck put my foot the break or not push my remote start to simulate a dash mounted push start. truck only starts with foot of break but will not go in gear! not sure if what you suggested will work?! don't want to buy parts and not work? I need more detail instructions plz
Submitted: 1 year ago.
Category: Dodge
Expert:  Tim Mohr replied 1 year ago.

It wont allow it ot go nto gear when using the remote start, this is the way its designed, but the push button start will not do this, and should work fine,Tim

Customer: replied 1 year ago.
ok! any ideas on where to buy a push button start other than a dealership?
Expert:  Tim Mohr replied 1 year ago.

most stereo shopd have them, same as the viper units, where did you purchase your viper?

Customer: replied 1 year ago.
Michigan, now live in arizona
Expert:  Tim Mohr replied 1 year ago.

ok, below is a lik to where you can get one online, its only 20 dollars for the kit,Tim

Expert:  -Brad- replied 1 year ago.

If you purchase a Start button to insert into the WCM it will not work if your vehicle isn't equipped with a PEM..