How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask -Brad- Your Own Question
-Brad-, Dodge Dealership Tech
Category: Dodge
Satisfied Customers: 8062
Experience:  16 Yrs Chrysler/Dodge Technician. ASE Master Certified(L-1)
Type Your Dodge Question Here...
-Brad- is online now
A new question is answered every 9 seconds

My 1999 dodge will not start I have replace the wire and

Customer Question

My 1999 dodge will not start I have replace the wire and spark plugs distributor and rotor car want to start but will not start
Submitted: 1 year ago.
Category: Dodge
Expert:  -Brad- replied 1 year ago.

Good afternoon and welcome to JustAnswer!!

Have you checked for spark and fuel? Will it start with starting fluid? Check engine light on and if so what codes does it have?

Standing by,


Customer: replied 1 year ago.
I replace the plugs and wires and distributor cap and rotor there are no code coming up the will not start whit starter fluid we get a spark on plug
Expert:  -Brad- replied 1 year ago.

Did it shut off or just wouldn't start one day? And do you have a scantool checking the codes? Does the scantool show a signal from the crankshaft?

Expert:  -Brad- replied 1 year ago.

I see this question is still open.. If you need more assistance feel free to reply, and if not then don't forget to rate so I'm compensated for my time..

Have a greatday,