How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask -Brad- Your Own Question
-Brad-, Dodge Dealership Tech
Category: Dodge
Satisfied Customers: 7993
Experience:  16 Yrs Chrysler/Dodge Technician. ASE Master Certified(L-1)
Type Your Dodge Question Here...
-Brad- is online now
A new question is answered every 9 seconds

I have a 2011 Ram crewcab 4x4. the vanity lights and map

Customer Question

I have a 2011 Ram crewcab 4x4. the vanity lights and map lights don't work, checked fuse 11 it looked fine but replaced it anyway, they still don't work.
Submitted: 1 year ago.
Category: Dodge
Expert:  -Brad- replied 1 year ago.

Good afternoon and welcome to JustAnswer!!

Have you checked for 12v to the lights? If not pull it down and see if the lights are getting 12v.. I have replaced many of the overhead's for bad LED lights..

Customer: replied 1 year ago.
No 12v getting to the visors and only one terminal of the map lights getting 12v when the doors are open or the dimmer switch is closed.
Expert:  -Brad- replied 1 year ago.

WHat is the last 8 digits of your VIN so I can grab a wiring diagram?

Customer: replied 1 year ago.
Expert:  -Brad- replied 1 year ago.

I attached the wiring for the vanity lights.. If your not getting 12v then you will need a scantool to see what codes are in the instrument cluster that supplies 12v to the lights..