How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, Chrysler/Dodge/Jeep master tech
Category: Dodge
Satisfied Customers: 22830
Experience:  ASE Master and Advanced Certified, Chrysler/Dodge/Jeep Master Certified, Trans and Hybrid Specialist
Type Your Dodge Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

My 4x4 switch seems to have failed. It was in 4 then I

Customer Question

My 4x4 switch seems to have failed. It was in 4 hi, then I switched it out, it disengaged, but the light is on still, and I cannot renegage 4x4 at all
Submitted: 1 year ago.
Category: Dodge
Expert:  bill replied 1 year ago.

what is the year make and model or preferably the vin to your vehicle?

Customer: replied 1 year ago.
2012 Dodge Ram 1500. I don't have the vin on hand, I'm out of state on business.
Expert:  sprinkles08 replied 1 year ago.

Hello and welcome to JustAnswer!

It's not likely to be a switch issue, it would be more likely to be the transfer case motor but could also be the disconnect actuator, wiring or the TIPM.

Is it in two wheel drive now but the four wheel high light is on?