How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don - Mo Lurch Your Own Question
Don - Mo Lurch
Don - Mo Lurch, Aftermarket & Factory Electronics
Category: Dodge
Satisfied Customers: 21048
Experience:  Cert. Dodge & Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
1609972
Type Your Dodge Question Here...
Don - Mo Lurch is online now
A new question is answered every 9 seconds

My passenger front window went down would not come back up.

Customer Question

My passenger front window went down would not come back up. Replaced motor only to have it still not go up. Had mechanic get window up so I could order a switch. Still goes down not up.
Submitted: 2 years ago.
Category: Dodge
Customer: replied 2 years ago.
Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Expert:  Don - Mo Lurch replied 2 years ago.

.

sorry for the delay............
.
Greetings...... “Hi, I’m Don (aka MOLurch) and I look forward to helping you!”
.
IF you replaced the Window Motor with New or a know "working one", then this can be the Regulator (I like replacing "both" the Regulator & Motor as a unit), Wiring, or Switch.
The way the Window Motor works is there has to be "Reversal Voltage + & Ground- at the "2" wires of the Window Motor.
Here is testing procedures:

Use of a VOM is needed to test
The way it works:
Ignition On
Switch held in Up position
One wire will have 12 Volts +
One wire will have Ground -

Switch held in Down position
The wire that had 12 Volts + is now Ground -
The wire that was Ground - is now 12 Volts +

If Voltage or Ground checks good at motor, replace motor.
If Voltage or Ground does not check good:
Check Switch Voltage & Ground.
Check for broken wires at Door / Kick Panel Boot

.
IF you need more information, please ask "prior" to Rating.
.
Please do the right thing and leave a rating, using the rating system, so I may be credited for this Q&A.
.
NOTE: Do NOT Rate on how much TIME you waited, because I am not on 24 / 7 and I answer as soon as I see the question.
The question will still remain open for follow up questions if needed.
.
If for any reason, you can't rate my answer OKAY, GOOD, or EXCELLENT today.
Please reply and let me know why, so I can help more/better.
.
Rating is very Important to our Service
.