How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask -Brad- Your Own Question
-Brad-, Dodge Dealership Tech
Category: Dodge
Satisfied Customers: 8060
Experience:  16 Yrs Chrysler/Dodge Technician. ASE Master Certified(L-1)
Type Your Dodge Question Here...
-Brad- is online now
A new question is answered every 9 seconds

I have a 2008 Dodge Ram with a 6.7 Cummins. Does it have a

Customer Question

I have a 2008 Dodge Ram with a 6.7 Cummins. Does it have a particulate filter? and can it be cleaned
Submitted: 2 years ago.
Category: Dodge
Expert:  -Brad- replied 2 years ago.

Good Morning and welcome to JustAnswer!!

Can you tell me what codes you have and if the tailpipe is black or clean? Have you had the 65K emission service performed?

Customer: replied 2 years ago.
Not showing any codes. And my tail pipe is clean. At 55k I had my mechanic replace the pollution devices because the truck started to lose power.
Expert:  -Brad- replied 2 years ago.

Thanks for the reply!!

Now you said your turbo says it needs to be cleaned.. How is the turbo saying it needs to be cleaned?

Customer: replied 2 years ago.
My check engine light came on and my mechanic said that's what it said it was.
Expert:  -Brad- replied 2 years ago.

I see now... And do you know what codes it had? I need to know what P codes are setting to determine whats going on...

Customer: replied 2 years ago.
I called my mechanic and they didn't put the code down.... So I don't know what it can be,but I think it has do do with the exhaust system.
Expert:  -Brad- replied 2 years ago.

Thanks for the reply!!

Ok at this time I can't suggest a repair because you don't have the codes.. I would drive it until the light comes on and once you have the codes post them here so I can see what's going on and get you fixed up..