How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Eric Your Own Question
Eric
Eric, Automotive Repair Shop Manager
Category: Dodge
Satisfied Customers: 32039
Experience:  20+ yrs. experience as repair shop manager and technician.
3195632
Type Your Dodge Question Here...
Eric is online now
A new question is answered every 9 seconds

I'm trying to remove my cv axle on my 2002 dodge ram 1500

Customer Question

Hi Tim - I'm trying to remove my cv axle on my 2002 dodge ram 1500 slt 4.7 auto. I successfully knocked the axle in a bit with a hammer and then used a pry bar on the to slide the inboard out, but it looks like the splines are locked to the shaft so I can't free the CV. is there any way to unfreeze these splines without removing the boot or tearing the CV axle apart?
Submitted: 1 year ago.
Category: Dodge
Expert:  Mrchippeway replied 1 year ago.

Hi did you still need help with issue? Are you trying to remove the axle from the knuckle? Or diff side

Expert:  Eric replied 1 year ago.

HI,

different expert here

here are directions

Expert:  Eric replied 1 year ago.

HI,

wrong one sent. here is correct one