How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jerry Your Own Question
Jerry, Master Mechanic
Category: Dodge
Satisfied Customers: 1754
Experience:  ASE Master tech, 30 years exp. troubleshooter, driveability tech
Type Your Dodge Question Here...
Jerry is online now
A new question is answered every 9 seconds

OK Ed, I've tested the following with these reading as a

Customer Question

OK Ed, I've tested the following with these reading as a result C1 PCM connector: PIN 2 & 22 have 12.65vdc, between terminals 4 and 17 have a resistance of 860 ohms and from PIN 31 & 32 to battery negative 2.0 ohms. This tells us we have to look further
as everything to this point checks out. I also unplugged the other sensors (1 at a time to check if puter would wake)prior to testing further to no prevail.
Submitted: 2 years ago.
Category: Dodge
Expert:  Dodgerench replied 2 years ago.
Goood morning. I'm posting just to let you know that I've sent a response on your other open question thread.