How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Eric Your Own Question
Eric, Automotive Repair Shop Manager
Category: Dodge
Satisfied Customers: 31893
Experience:  20+ yrs. experience as repair shop manager and technician.
Type Your Dodge Question Here...
Eric is online now
A new question is answered every 9 seconds

What parts do I need to change to replace a faulty

Customer Question

What parts do I need to change to replace a faulty immobiliser system on a 2003 Chrysler Voyager 2.5crd so far I've replaced the skim around the ignition, the BCM, the Ecu and fuse box module. And it still won't start, light on constant and other light
flashing. Please help!
Submitted: 2 years ago.
Category: Dodge
Expert:  Eric replied 2 years ago.
Unless you had the BCM and ECU and SKIM all programmed to your vehicle specifically(vin, mileage and skim code), it wont start. You replaced everything that could fail in the immobilizer system, but unless they are programmed to your vehicle using a factory level scan tool and software, it will not start.