How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Clayso Your Own Question
Clayso
Clayso, Master Automobile Technician
Category: Dodge
Satisfied Customers: 880
Experience:  ASE Master Certified Automobile Technician. 30 Years Experience.
77147243
Type Your Dodge Question Here...
Clayso is online now
A new question is answered every 9 seconds

Dodge caravan: I am trying t0 move the bolt from my rack

Customer Question

hi I am trying t0 move the bolt from my rack & pinion and the single one out of the three is spining why?
Submitted: 2 years ago.
Category: Dodge
Expert:  Clayso replied 2 years ago.
Hi There, I'm Clayso a certified master automobile technician with 30 years of automotive repair and diagnostic experience.
If I'm not bad wrong there is a nut on the other end of the mounting bolt on the other side of the cradle. Step #17 in the service and repair procedure states "Remove the 3 bolts and nuts mounting the steering gear to the front suspension cradle." The link below is the complete removal procedure for the rack & pinion.
Steering Gear Removal
http://tinyurl.com/nufslds
If you would also like the installation procedure let me know.
I hope this information is helpful to you.
Should you have any questions please let me know.
Positive ratings are greatly appreciated.
Thanks so much.