Dodge

Dodge Repair Questions? Ask a Mechanic for Answers ASAP

Ask an Expert,
Get an Answer ASAP!

Related Dodge Questions
My dodge won't pass 2500 rpm. I replaced some hoses that
My dodge won't pass 2500 rpm. I replaced some hoses that were ripped. It work for 2 days, no problem and now won't changed gears … read more
-Brad-
-Brad-
Foreman Dodge Dealership
Vocational, Technical or Trade Scho
8,211 satisfied customers
Grand Caravan SE: just replaced plugs, wires, valve cover gaskets,
just replaced plugs, wires, valve cover gaskets, and air filter and engine won't idle (revs at 2500 rpm).… read more
sprinkles08
sprinkles08
Technician
High School or GED
18,052 satisfied customers
dodge: Replaced 1995 3.9L dodge dakota head gaskets and plenum,
Replaced 1995 3.9L dodge dakota head gaskets and plenum, intake manifold gasket. I made one 90 mile trip and seemed to run fine. Went to drive home and truck won't run idles rough and back fires. Oil … read more
jazzmaster
jazzmaster
LEAD AUTO TECH
Vocational, Technical or Trade Scho
2,323 satisfied customers
intrpid: ok I have a 2002 dodge intrepid vin r that I picked
ok I have a 2002 dodge intrepid vin r that I picked up years ago it has the 2.7 engine that over heated I got a rebuilt engine from back east and had it put in had the trans rebuilt ran find but rough… read more
sprinkles08
sprinkles08
Technician
High School or GED
18,052 satisfied customers
Dodge Ram 1500 SLT: i have a 2004 dodge 1500 4.7 2wd . when
i have a 2004 dodge 1500 4.7 2wd . when engine is first started in the morning cold it runs fine until engine temp starts to increase then starts to hesitate, rpms jumps up and down and sometimes dies… read more
BOBBYSS
BOBBYSS
Automotive Repair/Damage Investigator
Associate Degree
14,560 satisfied customers
Dodge RAM 1500 4x2: 2006 Dodge Ram 1500, 4.7L engine, freshly
2006 Dodge Ram 1500, 4.7L engine, freshly rebuilt. Numerious items have been replaced, and/or tested. It has been to a Dodge dealership on 2 occasions, and they were unable to positively identify the … read more
Amedee
Amedee
Automotive Consultant
Vocational, Technical or Trade Scho
19,484 satisfied customers
Durango: Had a cam bank 1 failure on my 04 4.7. Found cam
Had a cam bank 1 failure on my 04 4.7. Found cam had wore out its tab and the primary timing chain tensioner was obliterated. Also had bent valves. I replaced timing chains, all tensioners, cam senser… read more
Anthony
Anthony
Master Automobile Technician
Vocational, Technical or Trade Scho
11,778 satisfied customers
Dodge Sprinter 2500: I have a 2005 2500 Sprinter van that just
I have a 2005 2500 Sprinter van that just started to run at a hotter temp than ever before. I replaced the thermostat without any improvement. I took it to the dealership and they say it's running wit… read more
Dodge expert
Dodge expert
ASE MASTER TECH, REPAIR FACILITY OWNER
High School or GED
3,636 satisfied customers
2004 Dakota: 4wd..cam sensor and the crank sensor..rpms..rev
Hello: I bought a 2004 Dakota 4wd 3.7 that over heated and the seats fell out of the head, I replaced the right head and one piston. I didn't know anything about the vehicle prior to buying it, how it… read more
Mopar Certified
Mopar Certified
Dodge Technician
Vocational, Technical or Trade Scho
6,073 satisfied customers
1999 dodge ram 1500: leaking coolant..already replaced cylinder heads
got a 1999 dodge ram 1500 5.9 l leaking coolant into the engine already replaced cylinder heads and resealed it. need help with this one.… read more
sprinkles08
sprinkles08
Technician
High School or GED
18,052 satisfied customers
1999 Dodge Dakota: cyl..idler pulley..alternator..ok, not overheating
1999 Dodge Dakota 6 cyl recently now sounds like a diesel truck. Replaced tension idler pulley, alternator charging ok, not overheating. What causes this diesel noise? has 104,000 miles.… read more
Amedee
Amedee
Automotive Consultant
Vocational, Technical or Trade Scho
19,484 satisfied customers
05 DODGE GRAND CARAVAN: 3.8 LITRE..RPM..CRANK SENSOR..AFTERMARKET
WHAT ARE THE POTENTIAL CAUSES OF P0344 CODE IN '05 DODGE GRAND CARAVAN, 3.8 LITRE, JUST PUT MOTOR BACK IN AFTER REBUILD. DEALER CAN'T FIGURE IT OUT, WON'T REV PAST 2400 RPM, REPLACED BOTH CAM AND CRAN… read more
Paul M ASE Master
Paul M ASE Master
Automotive College
4,537 satisfied customers
2007 Dodge Sprinter 2500: lost power..turbo..hill..the Alaska Highway
My 2007 Dodge Sprinter 2500 (Itasca Navion) has lost power and won't rev past 3000 rpm on the tachometer. I'm suspicious the turbo has failed as we were climbing a long hill on the Alaska Highway this… read more
Chris
Chris
Shop Foreman
7,095 satisfied customers
cam sensor ,crank sensor and checked fuel presure and tps,map and o2
2500 rpm max in park or drive.motor ran hot we replaced head gasskets and timmin chain ,fuel pump,cam sensor ,crank sensor and checked fuel presure and tps,map and o2's tore engine down again to reash… read more
Dodgerench
Dodgerench
ASE Certified Technician
Vocational, Technical or Trade Scho
2,822 satisfied customers
2006 dodge grand caravan: egr valve..rpm above 2500rpm
i just replaced my egr valve on a 2006 dodge grand caravan and now it won't maintain rpm above 2500rpm. It's wavering. any thoughts?… read more
quickcar
quickcar
High School or GED
1,688 satisfied customers
2008 Dodge Sprinter 2500: timing chain..the crankshaft and camshaft
Car: 2008 Dodge Sprinter 2500 3.0 Diesel I need help with installing the timing chain. I know how to install it but i dont know what position of the crankshaft and camshaft is supposed to be. Is there… read more
david
david
Heavy Duty Repair Mechanic
Vocational, Technical or Trade Scho
500 satisfied customers
2004 dodge ram 1500: sprockets..it cranks and runs..runs good..hits
my 2004 dodge ram 1500 4.7 i just changed the engine and used a 2002 engine and changed out the required sprockets got the truck together and it cranks and runs good but it will not rev higher than 25… read more
Mopar Certified
Mopar Certified
Dodge Technician
Vocational, Technical or Trade Scho
6,073 satisfied customers
1995 Jeep Grand Cherokee: 6 cylinder, 4.0..leak..needle stayed..drops
1995 Jeep Grand Cherokee, 6 cylinder, 4.0 . Replaced thermostat and radiator after we found a leak in the radiator. I seem to remember the needle stayed right in the middle at 210 before when everythi… read more
74duster
74duster
Vocational, Technical or Trade Scho
134 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

< Previous | Next >

Meet the Experts:

Jerry

Jerry

Master Mechanic

1,754 satisfied customers

ASE Master tech, 30 years exp. troubleshooter, driveability tech

Chris

Chris

Shop Foreman

7,095 satisfied customers

Dodge/Cummins and Chrysler Certified Master Tech

Mopar Certified

Mopar Certified

Dodge Technician

6,073 satisfied customers

24 Year Chrysler/Dodge Certified Specialist

moparfl

moparfl

ASE Certified Technician

3,292 satisfied customers

ASE Master Tech Gold level Chrysler Status 30 years dealership exp

Dodgerench

Dodgerench

ASE Certified Technician

2,822 satisfied customers

30+ years Dodge/Chrysler exp., ASE Master with L1 certification. Driveability/ combustion specialist

Tim Mohr

Tim Mohr

ASE MASTER TECH

2,363 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Don - Mo Lurch

Don - Mo Lurch

Aftermarket & Factory Electronics

1,593 satisfied customers

Cert. Dodge & Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x