Dodge

Dodge Repair Questions? Ask a Mechanic for Answers ASAP

Ask an Expert,
Get an Answer ASAP!

Related Dodge Questions
Need to R and R right lower control arm due to worn ball
Need to R and R right lower control arm due to worn ball joint and plan DIY looks like basically 3 attachment points Does everything usually come apart ok without bolts breaking etc?… read more
David Craig
David Craig
OWNER/MECHANIC
Associates
6,689 satisfied customers
07 ram 4*4, replacing front struts, can not get bottom bolt
07 ram 4*4 , replacing front struts, can not get bottom bolt that goes thru the strut to come off , tried air compresser for a long time, used a breaker bar but the inner bushing looks like it is rust… read more
-Brad-
-Brad-
Foreman Dodge Dealership
Vocational, Technical or Trade Scho
8,232 satisfied customers
ram 1500: I am changing the upper and lower ball joints on
I am changing the upper and lower ball joints on my truck. I have the bolts loose but they seem to be welded. How do I remove this?… read more
Mike S.
Mike S.
Vocational, Technical or Trade Scho
8,061 satisfied customers
2006 Dodge Dakota: tricks..lower bolt..strut to lower control arm
Any tricks/ thoughts on removal of the lower bolt that secures the strut to lower control arm on a 2006 Dodge Dakota?… read more
jeepmopar76
jeepmopar76
Master tech
Vocational, Technical or Trade Sc
1,222 satisfied customers
1993 Dodge Intrepid: the axle off of the drivers side..nut..steering
I have a 1993 Dodge Intrepid, and I am taking the axle off of the drivers side of the car. I already have the axle nut off. The problem I have run in to is I can't separate the steering knuckle from t… read more
Mopar Certified
Mopar Certified
Dodge Technician
Vocational, Technical or Trade Scho
6,073 satisfied customers
2002 dodge stratus: sedan..drivers side)..bolts and nuts are removed
2002 dodge stratus sedan 2.7L. trying to remove lower control arm(driver's side). All the bolts and nuts are removed, EXCEPT the long one at the front of the arm(the one going parallel with the car's … read more
Jerry
Jerry
Master Mechanic
Vocational, Technical or Trade Scho
1,754 satisfied customers
Dodge RAM 3500 4x4: needed to remove the lower control arm
Are there any special tools needed to remove the lower control arm on a Dodge RAM 3500 4x4 truck?… read more
moparfl
moparfl
ASE Certified Technician
Vocational, Technical or Trade Scho
3,292 satisfied customers
1977 b300: control arms and change out the bushings..sportsman van
Hi...do you have a procedure to remove control arms and change out the bushings on a 1977 B300 !ton dodge sportsman van ? I do not see it in my 1977-1979 repair book...or is it better to find new cont… read more
david
david
Heavy Duty Repair Mechanic
Vocational, Technical or Trade Scho
500 satisfied customers
following bolts on a 2009 1500 4x4 ram..front end..pin
hi i need torque specs for the following bolts on a 2009 1500 4x4 ram. front end- lower control arm bolts,lower strut bolt,upper strut bolts and the upper stablizer pin bolt. if you get those to me th… read more
sprinkles08
sprinkles08
Technician
High School or GED
18,109 satisfied customers
dodge: shocks..1500 ram 2007..upper control arm loose from the knuckle
how do you change the front shocks on a dodge 1500 ram 2007? I cant get the upper control arm loose from the knuckle?… read more
garrtim
garrtim
SERVICE MANAGER
2,266 satisfied customers
1998 Dodge Stratus: Lower Control Arm..The nut to this bolt is..hole
1998 Dodge Stratus - Replacing Lower Control Arm - This job seems pretty straight forward, but I am having trouble removing the front bolt where it connects underneath the car. The nut to this bolt is… read more
Amedee
Amedee
Automotive Consultant
Vocational, Technical or Trade Scho
19,604 satisfied customers
99 dodge dakota: lowercontrolarmbushings..tricks..compressor
hi, replacing lower control arm bushings on my 99 dodge dakota r/t today. any special tricks that i need to know about? i have all the tools except a spring compressor and i was not sure about that on… read more
jeepmopar76
jeepmopar76
Master tech
Vocational, Technical or Trade Sc
1,222 satisfied customers
1999 Dodge: Having problems with the bolts on the shocks..push through
Having problems with the bolts on the shocks of a 1999 Dodge Ram. The bolts were stuck so I cut the top of the bolt off thinking it would push through. Now its still stuck. Are the bolts threaded thro… read more
quickcar
quickcar
High School or GED
1,688 satisfied customers
98 dodge durango: lower control arms..4wd..suspension..control arm
i am replacing lower control arms on a 98 dodge durango 4wd . I have only unloaded one torsion bar . must I unload the whole suspension to get the stabilizer bar forward to fit in its pocket under the… read more
Kennyb28
Kennyb28
Service Manager
High School Diploma, some college,
327 satisfied customers
1995 Dodge Dakota Sport: 4X4..lower ball joints..a swing press..bolted
I have a 1995 Dodge Dakota Sport 4X4 that needs both lower ball joints. Do these need to be pressed in and out with a press or is it feasible to do it with a swing press and a jack? I was hoping they … read more
Jerry
Jerry
Master Mechanic
Vocational, Technical or Trade Scho
1,754 satisfied customers
Ram 1500: Quad cab..front wheel..I do not have a repair manual
I have a Ram 1500 Quad cab. I need to replace the front wheel hub. I do not have a repair manual. I have perlaced front wheel bearings before but not a sealed unit like this. I am looking for proper i… read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
pickup: ram 2wd..is it simple to replace the shocks; one..new one
I have a 1999 ram 2wd pickup. is it simple to replace the shocks; one at a time, upper and lower bolts out, shock out, new one in, replace the bolts? is there a jack or other consideration required th… read more
Leo
Leo
Associate Degree
572 satisfied customers
1999 Dodge intrepid: new Lower Control Arms..special tools
I need to get information on how to install new Lower Control Arms for a 1999 Dodge intrepid. Do I need any special tools?… read more
Virtual Wrench
Virtual Wrench
Owner of LJ Auto Repair 37 years
Associate Degree
14,398 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

< Previous | Next >

Meet the Experts:

Jerry

Jerry

Master Mechanic

1,754 satisfied customers

ASE Master tech, 30 years exp. troubleshooter, driveability tech

Chris

Chris

Shop Foreman

7,095 satisfied customers

Dodge/Cummins and Chrysler Certified Master Tech

Mopar Certified

Mopar Certified

Dodge Technician

6,073 satisfied customers

24 Year Chrysler/Dodge Certified Specialist

moparfl

moparfl

ASE Certified Technician

3,292 satisfied customers

ASE Master Tech Gold level Chrysler Status 30 years dealership exp

Dodgerench

Dodgerench

ASE Certified Technician

2,822 satisfied customers

30+ years Dodge/Chrysler exp., ASE Master with L1 certification. Driveability/ combustion specialist

Tim Mohr

Tim Mohr

ASE MASTER TECH

2,363 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Don - Mo Lurch

Don - Mo Lurch

Aftermarket & Factory Electronics

1,593 satisfied customers

Cert. Dodge & Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x