Dodge

Dodge Repair Questions? Ask a Mechanic for Answers ASAP

Ask an Expert,
Get an Answer ASAP!

Related Dodge Questions
My friend didnt passstate inspection something inspector
my friend didnt passstate inspection something inspector said about cam on 2.4L 4 cyl sxt avenger he owns any ideas what he was getting at friends a younger less experienced man … read more
sprinkles08
sprinkles08
Technician
High School or GED
18,057 satisfied customers
No throttle response. the car starts and idles but no gas
no throttle response. the car starts and idles but no gas pedal. I replaced the gas pedal and throttle body with no change. … read more
Dan
Dan
Dealership Technician
Associate Degree
2,191 satisfied customers
Where is the crankshaft position sensor bank 1 located on a
where is the crankshaft position sensor bank 1 located on a 2012 dodge avenger 2.4 vvt engine vin B … read more
Wayne Crawford
Wayne Crawford
3,928 satisfied customers
The temp gauge is moving up and down just started replace
The temp gauge is moving up and down just started replace the house not to long ago I have a 2013 dodge avenger 2.4 l … read more
vwtech0405
vwtech0405
VW Technician
Associate Degree
9,887 satisfied customers
Code 750 replaced ecm and signal wire to l/r solenoid. P0750
code 750 replaced ecm and signal wire to l/r solenoid … read more
Chris
Chris
Shop Foreman
7,095 satisfied customers
I have a 2012 dodge avenger engine 2.4 The a/c is not
I have a 2012 dodge avenger engine 2.4 The a/c is not working but if i connect it directly it works perfect. I do not where to look to solve this electrical problem.… read more
eric remington
eric remington
FORMER SHOP OWNER/TECHNICIAN/INSPECTOR
associates degree
1,361 satisfied customers
It just died on me while sitting a traffic light. When the
It just died on me while sitting a traffic light. When the ignition key was rotated to start position it did nothing. The next day I attempted to jump the car. At this pont it cranked but would not st… read more
-Brad-
-Brad-
Foreman Dodge Dealership
Vocational, Technical or Trade Scho
8,211 satisfied customers
2012 dodge avenger 2.4 liter cam sensor bank 1 reads bad
2012 dodge avenger 2.4 liter cam sensor b bank 1 reads bad changed it still reads bad pulled valve cover off timing chain still intact which way do I look now… read more
Juan Crespo
Juan Crespo
Sr. Technician
Bachelor's Degree
1,262 satisfied customers
2010 dodge avenger 2.4 no injector pulse and no spark
2010 dodge avenger 2.4 no injector pulse and no spark. I think is on limp mode.when I hooked a modis scanner on data under cam and crank readings it says fault on both and a straight signal line… read more
Pete
Pete
Automotive Diagnostic Specialist
General auto certifications
29,889 satisfied customers
2008 dodge avenger: engine turns..acts..steering wheel..lock position
battery excellent ....full charge one year old......tried to start the dodge 2008 avenger, the engine turns over......but engine will not fire up...the car acts like it is out of gas....have 3/4 of a … read more
Dodgerench
Dodgerench
ASE Certified Technician
Vocational, Technical or Trade Scho
2,822 satisfied customers
DODGE AVENGER: NO FUEL PRESSURE BUT..TANK IT WAS PUMPING COULD..RELAY
HELLO AGAI I HAVE A2008 DODGE AVENGER 2.4 ENGINE THE CAR WILL NOT START THERE IS NO FUEL PRESSURE BUT WHEN I PULLED THE PUMP FROM THE TANK IT WAS PUMPING COULD YOU PLEASE TELL ME IF THERE IS A RELAY A… read more
Vladimir Grodskiy
Vladimir Grodskiy
Automotive Electrician
Vocational, Technical or Trade Scho
2,724 satisfied customers
97 Dodge Avenger: turbo..water pump without pulling engine and tranny
Have a 97 Dodge Avenger. Motor was switched out to a 2002, Eclipse 420A 2.4 L double turbo. How do you replace water pump without pulling engine and tranny?… read more
Tom
Tom
Professor, Auto Technology
Bachelor's Degree
862 satisfied customers
2008 dodge avenger: 2.4 L, i..air filter..braking..couldnt find
I have a 2008 dodge avenger 2.4 L, i was changing the air filter and couldn't get the lid closed and ended up braking the clips off, and couldn't find what the part is called. so i was trying to find … read more
moparfl
moparfl
ASE Certified Technician
Vocational, Technical or Trade Scho
3,292 satisfied customers
1995 dodge avenger: 4 cyl sometimes cuts off..way down..spark plug
My 1995 dodge avenger 4 cyl sometimes cuts off. When I press the brake sometimes the rpm goes way down and then cuts off, other times it goes way down but then jumps back up. I thought this was a spar… read more
Mopar
Mopar
Sales
Associate Degree
172 satisfied customers
96 dodge dakota: 4 cyl 2.5 L...it stalled..fuel filter..filter located
I have a 96 dodge dakota 4 cyl 2.5 L. I was driving and it stalled. I assumed the fuel filter and pump. Where is the filter located? It acts like it wants to start but not quite getting enough gas.… read more
moparfl
moparfl
ASE Certified Technician
Vocational, Technical or Trade Scho
3,292 satisfied customers
98 Dodge Avenger: cyl engine..the valve cover gasket/spark plug seals
I have a 98 Dodge Avenger, 4 cyl engine (Model 420A) that has about an inch of oil in the far left and right spark plug wells. Is it the valve cover gasket/spark plug seals or something else?… read more
garrtim
garrtim
SERVICE MANAGER
2,266 satisfied customers
I have a 1998 Dodge Avenger/4 Cyl/Manaul Trans. that is ...
I have a 1998 Dodge Avenger/4 Cyl/Manaul Trans. that is beginning to sputter when pressing on the accellerator. The car has no problem starting, but also sputters a bit when starting it up. The proble… read more
Expert
Expert
2000 Dodge Caravan: I reach the air conditioning evaporator..cyl
Please could somebody tell me how can I reach the air conditioning evaporator of a 2000 Dodge Caravan 4 cyl 2.4 L? Do I need to disassamble the hole tablier? Thanks, Roy… read more
Danny
Danny
Service Manager / Foreman
Vocational tech. and College
418 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

< Previous | Next >

Meet the Experts:

Jerry

Jerry

Master Mechanic

1,754 satisfied customers

ASE Master tech, 30 years exp. troubleshooter, driveability tech

Chris

Chris

Shop Foreman

7,095 satisfied customers

Dodge/Cummins and Chrysler Certified Master Tech

Mopar Certified

Mopar Certified

Dodge Technician

6,073 satisfied customers

24 Year Chrysler/Dodge Certified Specialist

moparfl

moparfl

ASE Certified Technician

3,292 satisfied customers

ASE Master Tech Gold level Chrysler Status 30 years dealership exp

Dodgerench

Dodgerench

ASE Certified Technician

2,822 satisfied customers

30+ years Dodge/Chrysler exp., ASE Master with L1 certification. Driveability/ combustion specialist

Tim Mohr

Tim Mohr

ASE MASTER TECH

2,363 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Don - Mo Lurch

Don - Mo Lurch

Aftermarket & Factory Electronics

1,593 satisfied customers

Cert. Dodge & Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x