How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Dodge
Satisfied Customers: 35527
Experience:  ASE Certs
7276279
Type Your Dodge Question Here...
Ron is online now
A new question is answered every 9 seconds

Dodge Ram 1500: I have a fault code po720

Customer Question

I have a fault code po720
Submitted: 2 years ago.
Category: Dodge
Expert:  Ron replied 2 years ago.
Hello, my name is ***** ***** I am a professional here at Just Answer. I have noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.
The code P0720 indicates you still have a problem with the out put speed sensor and or the wiring from it to the PCM. If you are sure the new sensor is okay then you are going to need to check the wiring from it to the PCM. See the wiring diagram in the link below for reference.
https://dl.dropboxusercontent.com/u/104923897/P0720%20May%2011.pdf