Dodge

Dodge Repair Questions? Ask a Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Dodge Questions
Am I able to send you a video? When my car is on a or lift..
What's the make, model, and year of your car?Customer: when my car is on a jack or lift.. I can turn the front tires left and right (or side to side) a good couple inches of play it�s a 2014 dodge avenger… read more
RiopH
RiopH
Diagnostic Technician and programmer
699 satisfied customers
Much play in rack on 99 Dodge caravan-like inch on wheel.
much play in rack on 99 Dodge caravan-like inch on wheel. not outer tierods, both sides independantly loose. is there ajustment or need replacement? … read more
david carrier
david carrier
123 satisfied customers
Dakota: Need help (procedure) replacing broken front (left)
Need help (procedure) replacing broken front (left) wheel studs on RWD 1998 Dodge Dakota. 5 of 6 lug nuts came off after a shop repair, but I am stuck replacing them as I cannot get vehicle back to sh… read more
Eric
Eric
49,835 satisfied customers
Dodge Durango: 1999 Dodge Durango, the steering is very loose
1999 Dodge Durango, the steering is very loose when driving down the road. Would this be the Rac and Pinion that needs to be replaced?… read more
ND-TECH
ND-TECH
Chrysler/Jeep/Dodge specialist tech
Vocational, Technical or Trade Scho
1,410 satisfied customers
2002 Dodge Ram 1500 4X4: Liter..rack & Pinion..tie rods
2002 Dodge Ram 1500 4X4 w/5.9 Liter... I need instructions and illustrations for replacing rack & Pinion along with inner & outer tie rods as well as lower ball joints... thanks!… read more
Neal
Neal
Auto repair pro, 30 years experience
Associate Degree
8,388 satisfied customers
Dodge dakota: slt..v6..this and ball joints and upper arms
how hard is it to do wheel berings on a 1995 slt v6 dodge dakota. Also i was quated a price of about 800.00 to do this and ball joints and upper arms. I know i can do most of this any advice. also ano… read more
Randall C
Randall C
Auto Technician / Consultant
Vocational, Technical or Trade Scho
14,630 satisfied customers
92 Dodge Grand caravan: cv joint..front suspension..removing..axle
is there any way to repair/replace a cv joint boot while on the vehicle (without disassembling the front suspension and removing the axle) ? '92 Dodge Grand Caravan… read more
Randall C
Randall C
Auto Technician / Consultant
Vocational, Technical or Trade Scho
14,630 satisfied customers
1988 dodge Caravan SE: front end..V..the passenger side..rotor
Replaced my brake system and most of my front end on a 1988 dodge Caravan SE-V-6. Getting a rumbling shudder (vibration) from the passenger side ( or so it seems)when the brakes are applied. Even repl… read more
ASEMaster35yrs
ASEMaster35yrs
Vocational, Technical or Trade Scho
2,061 satisfied customers
how to dissamble front hub assembly,remove ball joints,have
how to dissamble front hub assembly,remove ball joints,have bad inner bearing,'77 dodge 4+4 w200,… read more
david
david
Heavy Duty Repair Mechanic
Vocational, Technical or Trade Scho
500 satisfied customers
97 caravan: I just got my rotors changed..outer tie..tie rods..cheep
I just got my rotors changed on a 97 caravan. they told me i needed to change the inner and outer tie rods. the said the parts were cheep but the labor was $400. do you have instructions for how do-it… read more
moparfl
moparfl
ASE Certified Technician
Vocational, Technical or Trade Scho
3,292 satisfied customers
2002 Stratus: the front wheel bearing assembly..puller..wrench
How do you replace the front wheel bearing assembly on a 2002 Stratus? Do you need a puller? Can you use a normal socket wrench? Do you need a torque wrench?… read more
moparfl
moparfl
ASE Certified Technician
Vocational, Technical or Trade Scho
3,292 satisfied customers
2004 dodge dakota: gotten progressively..Now, whatever temperature
At first, my 2004 dodge dakota made a loud, creeking noise when below freezing and going over bumps. It has gotten progressively worse since the purchase. Now, whatever temperature, when i turn the wh… read more
sprinkles08
sprinkles08
Technician
High School or GED
19,946 satisfied customers
Wheels..it sounds like i have a flat, but all tires have enough air
seems when i make a hard turn like you would when making a u turn the wheels seems to skip. like they arent turning correctly. sometimes when driving it sounds like i have a flat, but all tires have e… read more
Petek
Petek
Automotive Technician
Bachelor's Degree
156 satisfied customers
1996 dodge dakota: replacing..inner and outer tie rods..diagrams
replacing inner and outer tie rods on a 1996 dodge dakota would liek to know the best way to go about this or if there is and diagrams to be had that would be nice too… read more
Petek
Petek
Automotive Technician
Bachelor's Degree
156 satisfied customers
Parking garage..she turned the each corner to go up the next ramp
Just got a new bit of information from my wife that may confirm the diagnosis. For the past few days she has heard the "klunk" when driving up the parking garage at work. The sound was happening when … read more
sprinkles08
sprinkles08
Technician
High School or GED
19,946 satisfied customers
99 Dodge Stratus: front passenger..I turn the steering wheel
I have a '99 Dodge Stratus. The front passenger wheel won't turn when I turn the steering wheel. The front driver wheel will turn.… read more
RIP
RIP
Lead Technician
Vocational, Technical or Trade School
469 satisfied customers
91 dodge dakota: 000 miles..the inner tie rod from the rack and pinion
i have a 91 dodge dakota with 170,000 miles on it. i have to questions. the inner tie rods are bad and i would like to know how to remove the inner tie rod from the rack and pinion. and would it be wi… read more
Dodge Tech
Dodge Tech
Certified Master Auto Technician
Associate Degree
130 satisfied customers
1989 Dodge Aries: tie rods..ball joint..end that goes into the rack
How to adjust tie rods 1989 Dodge Aries. Do I need to take the ball joint end off to adjust, or do I just spin the end that goes into the rack?… read more
Davo
Davo
Master Auto Tech/manager of auto shop
Vocational, Technical or Trade Scho
1,644 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

< Previous | Next >

Meet the Experts:

Jerry

Jerry

Master Mechanic

1,754 satisfied customers

ASE Master tech, 30 years exp. troubleshooter, driveability tech

Chris

Chris

Shop Foreman

8,677 satisfied customers

Dodge/Cummins and Chrysler Certified Master Tech

Mopar Certified

Mopar Certified

Dodge Technician

7,328 satisfied customers

24 Year Chrysler/Dodge Certified Specialist

moparfl

moparfl

ASE Certified Technician

3,292 satisfied customers

ASE Master Tech Gold level Chrysler Status 30 years dealership exp

Dodgerench

Dodgerench

ASE Certified Technician

2,850 satisfied customers

30+ years Dodge/Chrysler exp., ASE Master with L1 certification. Driveability/ combustion specialist

Chris (aka-Moose)

Chris (aka-Moose)

Technician

2,513 satisfied customers

24 years of experience diagnosing & repairing

Tim Mohr

Tim Mohr

ASE MASTER TECH

2,479 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x