How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris Your Own Question
Chris, Shop Foreman
Category: Dodge
Satisfied Customers: 13754
Experience:  Dodge/Cummins and Chrysler Certified Master Tech
Type Your Dodge Question Here...
Chris is online now
A new question is answered every 9 seconds

How to change 6.7 Cummins turbo speed sensor simplified.

This answer was rated:

How to change 6.7 Cummins turbo speed sensor simplified.
Welcome and thank you for allowing me to assist you! This us a fairly easy job. First off get that huge air cleaner to turbo hose out of the way be opening up the air cleaner lid and then loosening the hose clamp on the turbo and removing the spring clamp on the smaller breather hose near the turbo. Disconnect the sensors on the air cleaner lid and set the air cleaner lid aside. Now get a 1/4 inch ratchet and but a deep 8mm socket on it. Remove the speed sensor mounting bolt. Then twist and pull the speed sensor up and out of the top of the turbo. Disconnect the speed sensor's connector. That's it! Reverse the procedure to install the new sensor.

I hope this helps, and let me know if you need further assistance with this.

Chris and 4 other Dodge Specialists are ready to help you