Dodge

Dodge Repair Questions? Ask a Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Dodge Questions
Have 2006 Dodge Ram 1500 2WD with slight shaking in steering
Have 2006 Dodge Ram 1500 2WD with slight shaking in steering wheel. Already replaced wheel bearing hub assembly both sides and disc brake pads. Rotors are smooth and straight. Shake doesn't get worse … read more
Pete
Pete
Automotive Diagnostic Specialist
General auto certifications
33,601 satisfied customers
Front tire wear inside every other lug on my new tires, have
front tire wear inside every other lug on my new tires, have put in new shocks, upper and lower ball joints, tie rod connections, wheel bearing and hubs. … read more
Ivan Alvarez
Ivan Alvarez
Automotive Technician
246 satisfied customers
Ram 2500: my 04 24v HO cummins was rebuilt in march. I have
my 04 24v HO cummins was rebuilt in march. I have a vibration in the floor board and in the pedal around 70 mph , i have taken it to the dealer twice and they replace the u joints in the drive shaft a… read more
Eric Gardner
Eric Gardner
Fleet Manager
Bachelor's Degree
238 satisfied customers
dodge truck ram 3500dually4x4,4 door: 2008 ram 3500 diesel
2008 ram 3500 diesel dually 4x4 4 door, has a vidration going down highway and gets worse when let off accelerator and even worse when apply brakes and even worse as you come to a stop. I had new roto… read more
Richard
Richard
Shop foreman/Lead technician
Vocational, Technical or Trade Scho
4,140 satisfied customers
1500 4X4: My 1999 Dodge Ram 1500 4x4 5.2l has a very light
My 1999 Dodge Ram 1500 4x4 5.2l has a very light intermittent shimmy. I have very good quality Bf Goodrich tires and recently installed new hub and bearing assemblies and new axle u-joints. I torqued … read more
-Brad-
-Brad-
Foreman Dodge Dealership
Vocational, Technical or Trade Scho
8,266 satisfied customers
2007 Ram 3500: drivetrain..joints, the carrier bearing..driveshaft
I have a 2007 Ram 3500 Megacab DRW and I have developed a fine vibration in the drivetrain. I have changed the 2 rear U-joints, the carrier bearing, and had the driveshaft checked for balance and it w… read more
Ted G.
Ted G.
Sales Manager
Vocational, Technical or Trade Scho
5,629 satisfied customers
2006 Dodge Ram 1500: I get the 4 bolts..assembly..Quad cab..cab 4x4
How do I get the 4 bolts out of the front wheel bearing assembly on my 2006 Dodge Ram 1500 5.7 Quad cab 4x4?… read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
1500 dodge: half shaft..4wd..the shavt and I cant pull it..loose
how do I remove the half shaft on my 4wd 1500 dodge I have everything removed except the shavt and I cant pull it out to install the new one noe that the shaft is loose the new part looks like there i… read more
Jerry
Jerry
Master Mechanic
Vocational, Technical or Trade Scho
1,754 satisfied customers
2003 dodge: hub..ton..joint is too big to get a socket or wrench on
how do you get to the 3 bolts holding the hub on a 2003 dodge ram 1/2 ton. the joint is too big to get a socket or wrench on? thanks , john.… read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
2007 Ram 1500: front wheel bearing..a press on or slip on bearing
Need to know how to shange a front wheel bearing on a 2007 Ram 1500 and if it is a press on or slip on bearing please and thank you… read more
Dodge expert
Dodge expert
ASE MASTER TECH, REPAIR FACILITY OWNER
High School or GED
3,636 satisfied customers
The bolts off the wheel berring to re place it i can see the bolts
how do you get the bolts off the wheel berring to re place it i can see the bolts just cant get the socket on them to get them out please help! on a 2005 dodge ram 1500 front wheel berring… read more
Amedee
Amedee
Automotive Consultant
Vocational, Technical or Trade Scho
21,094 satisfied customers
2002 jeep liberty sport: speeds above 50 mph..brakes..front end..tires
i have a 2002 jeep liberty sport at speeds above 50 mph randomly my wheel has a slight vibration then when i apply the brakes my front end feels like it is going to shake off? i have replaced rotors b… read more
b5demon
b5demon
Automotive Technician
Vocational, Technical or Trade Scho
3,737 satisfied customers
Dodge Ram 1500: bolts..wheel hub assembly to replace the bearing..4x4
how do you get the bolts off the back of the wheel hub assembly to replace the bearing on the front driver side of a 2007 4x4 Dodge Ram 1500… read more
hauto
hauto
Operate own repair shop
Bachelor's Degree
2,719 satisfied customers
2003 Dodge Ram 1500: change a Front Wheel bearing..only one goes out
How hard is it to change a Front Wheel bearing on a 2003 Dodge Ram 1500 4WD? Do you have to replace both if only one goes out?… read more
Mopar Certified
Mopar Certified
Dodge Technician
Vocational, Technical or Trade Scho
6,295 satisfied customers
2003 dodge: it ok to disconnect the front drive axles
Is it ok to disconnect the front drive axles on a 2003 dodge ram? If it is how do I do it?… read more
Randall C
Randall C
Auto Technician / Consultant
Vocational, Technical or Trade Scho
13,431 satisfied customers
how easy is it to replace the front struts on my 2006 Dodge
how easy is it to replace the front struts on my 2006 Dodge Ram 1500 4wd 5.7 quad cab? Could I do it myself?… read more
moparfl
moparfl
ASE Certified Technician
Vocational, Technical or Trade Scho
3,292 satisfied customers
Dodge Ram 1500 4X4: driver side CV shaft (whole shaft..assembly
I have a 03 Dodge Ram 1500 4X4 with 4.7 motor. I am replacing driver side CV shaft (whole shaft from the differential to the wheel). I have removed the steering knuckle assembly. Now the shaft stuck t… read more
moparfl
moparfl
ASE Certified Technician
Vocational, Technical or Trade Scho
3,292 satisfied customers
Ram 1500: Quad cab..front wheel..I do not have a repair manual
I have a Ram 1500 Quad cab. I need to replace the front wheel hub. I do not have a repair manual. I have perlaced front wheel bearings before but not a sealed unit like this. I am looking for proper i… read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

< Previous | Next >

Meet the Experts:

Jerry

Jerry

Master Mechanic

1,754 satisfied customers

ASE Master tech, 30 years exp. troubleshooter, driveability tech

Chris

Chris

Shop Foreman

7,702 satisfied customers

Dodge/Cummins and Chrysler Certified Master Tech

Mopar Certified

Mopar Certified

Dodge Technician

6,295 satisfied customers

24 Year Chrysler/Dodge Certified Specialist

moparfl

moparfl

ASE Certified Technician

3,292 satisfied customers

ASE Master Tech Gold level Chrysler Status 30 years dealership exp

Dodgerench

Dodgerench

ASE Certified Technician

2,850 satisfied customers

30+ years Dodge/Chrysler exp., ASE Master with L1 certification. Driveability/ combustion specialist

Tim Mohr

Tim Mohr

ASE MASTER TECH

2,434 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Chris (aka-Moose)

Chris (aka-Moose)

Technician

1,832 satisfied customers

16 years of experience

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x