Dodge

Dodge Repair Questions? Ask a Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Dodge Questions
1998 2.7l Dodge Intrepid camshaft timing marks. Do I use the
1998 2.7l Dodge Intrepid camshaft timing marks. Do I use the dots or the triangle on the drivers side head. why two marks? … read more
LuisE218
LuisE218
Technician
High school
485 satisfied customers
I'm working on a 2003 dodge stratus 2.7L I have the primary
Hi I'm working on a 2003 dodge stratus 2.7L I have the primary chain off. I'm now trying to line the left cam dots at a 12 o clock position. Can the cams be turned one full turn now since the crank wo… read more
Jared D
Jared D
Shop Supervisor
Bachelor's
2,521 satisfied customers
The 2006 Dodge Magnum 2.7 when tighting the camshaft caps to
the 2006 Dodge Magnum 2.7 when tighting the camshaft caps to 105 inch pounds or even 55 inch pounds the cam will not turn is very tight on the round spot of the cam I used a small pipe wrench with a c… read more
vipertech763
vipertech763
Vocational, Technical or Trade Scho
1,854 satisfied customers
2006 Dodge Magnum 2.7 I aline the crankshaft with arrow on
2006 Dodge Magnum 2.7 I aline the crankshaft with arrow on oil pump but the number one piston not at top dead center is this the way this engine times ???… read more
George H.
George H.
Technician
Associate Degree
19,160 satisfied customers
dodge Dodge Stratus: 2004 2.7l Dodge Stratus Sedan Vin-T has
2004 2.7l Dodge Stratus Sedan Vin-T has no spark after replacing water pump. Replaced primary timing tensioner hydraulic push thing, and Cam Position Sensor.… read more
Robert R
Robert R
Auto Technician
Vocational, Technical or Trade Scho
5,709 satisfied customers
Dodge Stratus: I have a 2001 doge stratus with 2.7 liter I
I have a 2001 doge stratus with 2.7 liter I am putting in timing chain and have my marks and chain links aligned and have the cams pointers all pointing up no colored links on chain but 12 links in be… read more
Robert R
Robert R
Auto Technician
Vocational, Technical or Trade Scho
5,709 satisfied customers
2001 dodge intrepid: Liter engine..camshaft..2 timing marks..cam gear
I am trying to set the timing on a 2001 dodge intrepid 2.7 Liter engine. One problem that I am having is that the left side camshaft gear has 2 timing marks, one that is a small circle or dot just lik… read more
Mopar Certified
Mopar Certified
Dodge Technician
Vocational, Technical or Trade Scho
7,419 satisfied customers
2004 dodge: alignment..the cam sprockets..passenger side..driver side
installing timing chains on 2004 dodge intripet 2.7 L not sure of the alignment marks on the cam sprockets for the passenger side dual cams. I did find the arrow marks on the driver side only marks fo… read more
BigBob
BigBob
Service Manager
High School or GED
4,792 satisfied customers
1995 dodge: crank..rotor..timing marks are aligned like shown
1995 dodge 1500 3.9 when #1 @TDC cam timing mark @ 12:00 crank timing mark @ 12:00 when I align timing marks at 6:00 and 12:00 respectively rotor points 180 degrees away. Is the rotor suppose to point… read more
George H.
George H.
Technician
Associate Degree
19,160 satisfied customers
dodge intrepid 2000 dodge intrepid when I got this car it
2000 dodge intrepid when I got this car it would not run,I ran fuel presure test low but in spec. checked fire.got spark,ckecked compression round 125 pulled right valve cover had piece of chain guide… read more
kalamykid
kalamykid
Pactor automotive
Vocational, Technical or Trade Scho
6,156 satisfied customers
2001 Dodge Intrepid: im working..2.7l..valves were bent on the heads
I'm working on a 2001 Dodge Intrepid 2.7l engine. The valves were bent on the heads on this engine. The heads have been professionally redone. However I'm not sure that they aligned the cams correctly… read more
garrtim
garrtim
SERVICE MANAGER
2,320 satisfied customers
2003 dodge stratus: head gaskets..chain..marks line up cam sprockets
2003 dodge stratus 2.7l did head gaskets and have set timing a couple of times but seem to be a little out everytime. tore back down , have primary chain on marks line up cam sprockets are free wheeli… read more
Vladimir Grodskiy
Vladimir Grodskiy
Automotive Electrician
Vocational, Technical or Trade Scho
2,807 satisfied customers
2000 durango: 5.9L magnum engine..timing marks..timing chain..gears
5.9L magnum engine, 2000 durango, timing marks. I have the timing chain cover off, & I see 2 lines, "notches" in the gears, but I also see what might be dots...which are supposed to be lined up?… read more
Roland
Roland
Auto Tech
High School or GED
444 satisfied customers
2004 Dodge: oil pump..back together..sure the timing marks..aligned
Had to replace the oil pump on a 2004 Dodge 3.7 PU. Got everthing back together, but it was missing a little. Pulled everthing back off, made sure the timing marks were all aligned. Bottom at 6 oclock… read more
sprinkles08
sprinkles08
Technician
High School or GED
19,946 satisfied customers
Dodge durango: timing chain..4.7l..timing marks on sprockets
when replacing primary timing chain on a 03 dodge durango 4.7l . how many links between timing marks on sprockets ? does the count include the markes?… read more
sprinkles08
sprinkles08
Technician
High School or GED
19,946 satisfied customers
retaing clips off of the cam spockets and also reset timing..completly
how do I get the retaing clips off of the cam spockets and also reset timing when the marks are completly off… read more
Doug in North Carolina
Doug in North Carolina
Automotive Service Technician
Vocational, Technical or Trade Scho
301 satisfied customers
Timing chain..gears..i crank it up it loses it marks and wont start up
A couple of days ago i ask about replacing a timing chain and received an answer to line up the o on the gears, have tried that i turn it over by hand ans stays linned up but when i crank it up it los… read more
sprinkles08
sprinkles08
Technician
High School or GED
19,946 satisfied customers
1995 dakota: used motor..they put a new timing chain..good power
I have a 1995 dakota with a 3.9.I just had used motor put in,they put a new timing chain.motor doesnot have good power,no gas miliage,and a skip at a idle. i have checked all sensors.I feel timing is … read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

< Previous | Next >

Meet the Experts:

Jerry

Jerry

Master Mechanic

1,754 satisfied customers

ASE Master tech, 30 years exp. troubleshooter, driveability tech

Chris

Chris

Shop Foreman

8,691 satisfied customers

Dodge/Cummins and Chrysler Certified Master Tech

Mopar Certified

Mopar Certified

Dodge Technician

7,419 satisfied customers

24 Year Chrysler/Dodge Certified Specialist

moparfl

moparfl

ASE Certified Technician

3,292 satisfied customers

ASE Master Tech Gold level Chrysler Status 30 years dealership exp

Dodgerench

Dodgerench

ASE Certified Technician

2,850 satisfied customers

30+ years Dodge/Chrysler exp., ASE Master with L1 certification. Driveability/ combustion specialist

Chris (aka-Moose)

Chris (aka-Moose)

Technician

2,539 satisfied customers

24 years of experience diagnosing & repairing

Tim Mohr

Tim Mohr

ASE MASTER TECH

2,479 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x