How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Canadafix Your Own Question
Canadafix, Canadian Class A
Category: Dodge
Satisfied Customers: 1632
Experience:  Have owned/operated an automotive repair shop for the last 19 years working on all makes and models of vehicles
Type Your Dodge Question Here...
Canadafix is online now
A new question is answered every 9 seconds

2001 dodge: oil pressure sensor..with a cummins turbo diesel

This answer was rated:

how do I change the oil pressure sensor on a 2001 dodge with a cummins turbo diesel, where is it located.
Hello and welcome to Just Answer.

The oil pressure sensor is mounted on the left side of the engine block, just below the ECU.
Here is a diagram.

The sensor unthreads from the block counterclockwise.
Use a deep wall socket that fits correctly.
Install the new one (a little oil on the O ring first).
Tighten it to 144 in/lbs.

Thank you,
Canadafix and 7 other Dodge Specialists are ready to help you