Dodge

Dodge Repair Questions? Ask a Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Dodge Questions
Ram 1500 4wd 4.7: OK, I'm trying to get the cv joint/axle assembly
OK, I'm trying to get the cv joint/axle assembly off the stub spindle that comes out of the front differential. I've seen everybody just prying it off but mine will not come off. It is completely wobb… read more
Wayne Crawford
Wayne Crawford
4,052 satisfied customers
1500 4x4: I have a 2002 Dodge 1500 4x4 pickup. there is a oil
I have a 2002 Dodge 1500 4x4 pickup. there is a oil leak where the right front cv shaft goes into the housing for the differential, looks like there is an oil seal right there. My qoestion is, can I r… read more
Randall C
Randall C
Auto Technician / Consultant
Vocational, Technical or Trade Scho
14,771 satisfied customers
1500 4 Ed truck: How do I compress the cv joint enough to get
How do I compress the cv joint enough to get it back on the axle shaft after replacing driver side wheel bearing… read more
Daniel
Daniel
Dodge Technician
5,064 satisfied customers
pickup: front left and right u-joints..ton..5.9L Diesel
What is the step by step procedure for replacing the front left and right u-joints for this one ton pickup truck? Please include pictures, notes and cautions. 2006 Dodge Ram 3500 4x4 5.9L Diesel. Addi… read more
Dale Stockstill
Dale Stockstill
Retired
Vocational, Technical or Trade Scho
1,223 satisfied customers
Remove front..front drive..all bolts and it..spindle
trying to remove front drive axil to replace u joint . removed all bolts and it still will not come off spindle… read more
Dodge expert
Dodge expert
ASE MASTER TECH, REPAIR FACILITY OWNER
High School or GED
3,636 satisfied customers
Dodge pickup 1500 just replaced axle bearings/seals on 03,
just replaced axle bearings/seals on 03, pickup 1500. i get a humming noise upon acceleration up to 65 mph.… read more
garrtim
garrtim
SERVICE MANAGER
2,320 satisfied customers
1998 Dodge Caravan: two wheel drive..He needs to replace transmission
Friend of mine has 1998 Dodge Caravan two wheel drive. He needs to replace transmission on it. Do you have good instructions for this work. Already have Van Manual with about 2*22 point istructions. I… read more
Eric
Eric
50,893 satisfied customers
2003 dodge: it ok to disconnect the front drive axles
Is it ok to disconnect the front drive axles on a 2003 dodge ram? If it is how do I do it?… read more
Randall C
Randall C
Auto Technician / Consultant
Vocational, Technical or Trade Scho
14,771 satisfied customers
Dodge: 1500 4x4..front rear end that fits..four wheel drive..engaged
Hello, My Dodge 2002 1500 4x4 has a shaft that comes out of the front rear end that fits into the cv axle that powers the four wheel drive when engaged. The shaft has lost it's splines and just spins … read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
Durango: new ball joints and tie rod ends put..my front end..70mph
I have 01 Durango. I have had new ball joints and tie rod ends put on and 3 front end alignments done in the last three weeks, but my front end is still making a bad womping or bouncing sound that inc… read more
Ricardo Hohl
Ricardo Hohl
Auto Motive Instructor
Automotive tech
4,563 satisfied customers
1982 dodge aries: trying to pull the driver side cvjoint
I have a 1982 dodge aries and I am trying to pull the driver side cvjoint. I have pulled the inter joint apart. leaving just the inter housing in the transmission. I have done everything i can think o… read more
Eric
Eric
50,893 satisfied customers
2007 Dodge: Horn..a 6.7 desiel..Reverse..clutch..idles fine
I have a 2007 Dodge 3500HD (Big Horn) with a 6.7 desiel and a 6 speed manual Transmission. Reverse is not working, all forward gears work fine. You can put it in reverse and let off the clutch and not… read more
moparfl
moparfl
ASE Certified Technician
Vocational, Technical or Trade Scho
3,292 satisfied customers
2003 dodge ram 3500: I need an exploded view of the nv5600
I need an exploded view of the nv5600 for my 2003 dodge ram 3500 diesel. where can i find one?… read more
moparfl
moparfl
ASE Certified Technician
Vocational, Technical or Trade Scho
3,292 satisfied customers
Front axel..wheel drive..drivers side..side front..front wheel
how do I disasemble front axel on 2006 one ton dually dieselXXXXX to replace U joint drivers side front wheel… read more
sprinkles08
sprinkles08
Technician
High School or GED
19,946 satisfied customers
1991 Dodge Grand caravan: 3.3L auto no abs..new one..I drove a couple
I have a 1991 Dodge Grand caravan 3.3L auto no abs FWD. I replaced the LHS driveshaft with a new one provided by Lordco. I drove a couple of kilometers before it literally blue apart (in 2 pieces. Lor… read more
Petek
Petek
Automotive Technician
Bachelor's Degree
156 satisfied customers
Bearing..the 3rd member apart to pull the axle..local shop
I am trying to pull the axle to replace the axle bearing. It looks like I have to take the 3rd member apart to pull the axle. I was told by a local shop that it could cost as much as $1200. They said … read more
Kevin
Kevin
ASE CERTIFIED MECHANIC
330 satisfied customers
1998 Caravan sport: front wheel bearing..3.3L..axel bolt and 4 bolts
I will be replacing a front wheel bearing on a 1998 Caravan sport 3.3L 15" wheels. I understand I need to remove axel bolt and 4 bolts behind the wheel. But some places say you must remove axel or tie… read more
ProAnswerMan
ProAnswerMan
ASE Master Technician
Associate Degree
408 satisfied customers
97 ram 1500: clips in rear end,is it a heated press cap or bearing
how do you remove the rear axles on a 97 ram 1500, dont see any clips in rear end,is it a heated press cap or bearing?… read more
Scott
Scott
1,189 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

< Previous | Next >

Meet the Experts:

Jerry

Jerry

Master Mechanic

1,754 satisfied customers

ASE Master tech, 30 years exp. troubleshooter, driveability tech

Chris

Chris

Shop Foreman

8,691 satisfied customers

Dodge/Cummins and Chrysler Certified Master Tech

Mopar Certified

Mopar Certified

Dodge Technician

7,419 satisfied customers

24 Year Chrysler/Dodge Certified Specialist

moparfl

moparfl

ASE Certified Technician

3,292 satisfied customers

ASE Master Tech Gold level Chrysler Status 30 years dealership exp

Dodgerench

Dodgerench

ASE Certified Technician

2,850 satisfied customers

30+ years Dodge/Chrysler exp., ASE Master with L1 certification. Driveability/ combustion specialist

Chris (aka-Moose)

Chris (aka-Moose)

Technician

2,539 satisfied customers

24 years of experience diagnosing & repairing

Tim Mohr

Tim Mohr

ASE MASTER TECH

2,479 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x