How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Eric Your Own Question
Eric
Eric, Automotive Repair Shop Manager
Category: Dodge
Satisfied Customers: 32574
Experience:  20+ yrs. experience as repair shop manager and technician.
3195632
Type Your Dodge Question Here...
Eric is online now
A new question is answered every 9 seconds

I have a code P2308. I know its a coil or wires but wich 1 . Its 5.

Resolved Question:

I have a code P2308. I know it's a coil or wires but wich 1 . It's 5.7
Submitted: 6 years ago.
Category: Dodge
Expert:  Eric replied 6 years ago.
Hi,

P2308-IGNITION COIL #3 SECONDARY CIRCUIT-INSUFFICIENT IONIZATION

When Monitored: Engine Running.

Set Condition: If PCM detects that the secondary ignition burn time is incorrect or not

present an error is detected. One Trip Fault

POSSIBLE CAUSES

INTERMITTENT CONDITION

SPARK PLUG

IGNITION WIRE

IGNITION COIL OPERATION

IGNITION COIL CONTROL CIRCUIT OPEN

COIL CONTROL CIRCUIT SHORTED TO GROUND

PCM

(A142) ASD RELAY OUTPUT CIRCUIT

IGNITION COIL

 

Check resistance on coil #3. If not within specs below, replace it

 

Ignition Coil Resistance
Applies To Primary
Min.
Resistance
(Ohms)
Primary
Max.
Resistance
(Ohms)
Oil Filled 0.558 0.682

#3 cylinder location:

 


Click image to see an enlarged view
Eric and other Dodge Specialists are ready to help you