How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Z. Your Own Question
Ron Z.
Ron Z., - Dodge Tech -
Category: Dodge
Satisfied Customers: 18959
Experience:  18+yrs experience. State Inspector and Dodge Diagnostics
18617752
Type Your Dodge Question Here...
Ron Z. is online now
A new question is answered every 9 seconds

Dodge Caravan need sequence and torque specs for 03 dodge

Resolved Question:

need sequence and torque specs for 03 dodge caravan 3.3l
Submitted: 6 years ago.
Category: Dodge
Expert:  Ron Z. replied 6 years ago.

Welcome to JustAnswer.com! My name is DriveFast71(Ron) and I will do my best to answer all of your questions completely and accurately.


 

Is this for the Cylinder Heads?

 

Customer: replied 6 years ago.
need info for intake gasket
Expert:  Ron Z. replied 6 years ago.

graphic

  • Tighten intake manifold end seal retainer screws to 12 Nm (105 in. lbs.) .
  • Torque lower intake manifold bolts in 3 steps. graphic

  • Step 1: Tighten all bolts in sequence to 1 Nm (10 in. lbs.) .

    Step 2: Tighten all bolts in sequence to 22 Nm (200 in. lbs.) .
    Step 3: Tighten all bolts in sequence (again) to 22 Nm (200 in. lbs.) .

Ron Z. and 8 other Dodge Specialists are ready to help you